{"product_id":"btl-25-6v110-bp","title":"Micromall 25.6V 110Ah Lithium Battery Essential LiFePO4 Battery Deep Cycle Battery with 8S Battery Protector","description":"\u003cp\u003eThis package pairs the MICROMALL 25.6V 110Ah Essential LiFePO4 deep-cycle battery with a matched MICROMALL 8S Battery Protector. It is designed for customers who want dependable stored energy together with an additional layer of cell balancing and battery protection.\u003c\/p\u003e\n\u003ch2\u003eWhy the Battery Protector is included\u003c\/h2\u003e\n\u003cp\u003eLiFePO4 packs contain multiple cells connected in series. Over time, small differences between cell voltages can become more noticeable, particularly in batteries that are charged and discharged frequently. The matched 8S protector monitors the correct series configuration and actively discharges higher-voltage cells when balancing conditions are reached.\u003c\/p\u003e\n\u003cp\u003eThis helps keep the cells closer together in voltage, supports more consistent charging and discharging, and helps the battery use its available capacity more evenly. The protector also provides overcharge, over-discharge, over-current and short-circuit protection. It does not increase the battery's rated capacity and does not replace correct charging equipment or professional installation.\u003c\/p\u003e\n\u003ch2\u003ePackage contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × MICROMALL 25.6V 110Ah Essential LiFePO4 Battery — SKU: BTL-25.6V110\u003c\/li\u003e\n\u003cli\u003e1 × MICROMALL 8S LiFePO4 Battery Protector — SKU: 24V-BP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBattery performance\u003c\/h2\u003e\n\u003cp\u003eThe included 25.6V 110Ah battery provides 2.8kWh of nominal energy and approximately 2.5kWh of usable energy. It is suited to 24V-class solar storage, marine, mobile and off-grid energy systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery model: NZ-24110\u003c\/li\u003e\n\u003cli\u003eBattery chemistry: LiFePO4\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 25.6V\u003c\/li\u003e\n\u003cli\u003eCapacity: 110Ah\u003c\/li\u003e\n\u003cli\u003eNominal \/ usable energy: 2.8kWh \/ 2.5kWh\u003c\/li\u003e\n\u003cli\u003eRecommended depth of discharge: 90%\u003c\/li\u003e\n\u003cli\u003eRecommended charge\/discharge current: 50A\u003c\/li\u003e\n\u003cli\u003eMaximum charge\/discharge current: 100A\u003c\/li\u003e\n\u003cli\u003ePeak current: 200A for 500ms at 25°C\u003c\/li\u003e\n\u003cli\u003eDimensions: 485 × 240 × 168mm\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23kg (datasheet tolerance ±2kg)\u003c\/li\u003e\n\u003cli\u003eLCD battery display\u003c\/li\u003e\n\u003cli\u003eBluetooth communication\u003c\/li\u003e\n\u003cli\u003eAt least 6,000 cycles under the stated datasheet test conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMatched Battery Protector specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible chemistry: LiFePO4\u003c\/li\u003e\n\u003cli\u003eSeries configuration: 8S\u003c\/li\u003e\n\u003cli\u003eNominal cell voltage: 3.2V per cell\u003c\/li\u003e\n\u003cli\u003eBalancing activation voltage: 25.6V ±0.1V total pack voltage\u003c\/li\u003e\n\u003cli\u003eBalancing threshold: ≥25.0V\u003c\/li\u003e\n\u003cli\u003eSustained balancing current: 2A ±1A\u003c\/li\u003e\n\u003cli\u003ePeak balancing current: 5A\u003c\/li\u003e\n\u003cli\u003eStatic power consumption: Less than 20µA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to install the Battery Protector\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The protector requires correct cell-level wiring and must match the battery's 8S configuration. Incorrect wiring, a skipped connection or reverse polarity can permanently damage the protector or battery and may create a fire hazard. Installation should be completed by a person familiar with series-connected LiFePO4 batteries.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eIsolate the battery: Switch off and disconnect all chargers, inverters, loads and other equipment from the battery before starting.\u003c\/li\u003e\n\u003cli\u003eConfirm compatibility: Verify that the battery is LiFePO4 and uses a 8S series configuration. Do not install the 8S protector on a battery with a different cell count or chemistry.\u003c\/li\u003e\n\u003cli\u003eIdentify the connection points: Locate the battery's main negative terminal, each cell-to-cell positive junction and the main positive terminal. Cell numbering starts from the main negative end of the pack.\u003c\/li\u003e\n\u003cli\u003eConnect in order: Attach the supplied harness to the battery connection points in this exact sequence: B-, B1, B2, B3, B4, B5, B6, B7 and B+. Do not skip, swap or reverse any connection.\u003c\/li\u003e\n\u003cli\u003eInspect the wiring: Confirm that every connection is secure, correctly insulated and connected to the intended point before the harness is fully connected to the protector.\u003c\/li\u003e\n\u003cli\u003eVerify with a multimeter: Measure the battery output after wiring. The reading should be close to the total pack voltage. If the reading is unexpected, disconnect the harness and recheck the wiring.\u003c\/li\u003e\n\u003cli\u003eTest the system: Connect a compatible charger or load only after all wiring and voltage checks have passed. During the first test, monitor the battery and protector for abnormal heat, smell or behaviour.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eHarness connection reference\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eHarness lead\u003c\/th\u003e\n\u003cth\u003eBattery connection point\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eB-\u003c\/td\u003e\n\u003ctd\u003eMain negative terminal of the battery pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB1\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 1 and Cell 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB2\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 2 and Cell 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB3\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 3 and Cell 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB4\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 4 and Cell 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB5\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 5 and Cell 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB6\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 6 and Cell 7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB7\u003c\/td\u003e\n\u003ctd\u003ePositive junction between Cell 7 and Cell 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB+\u003c\/td\u003e\n\u003ctd\u003eMain positive terminal of the battery pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSafe operation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse a compatible LiFePO4 charger.\u003c\/li\u003e\n\u003cli\u003eDo not reverse polarity or exceed the stated current ratings.\u003c\/li\u003e\n\u003cli\u003eInstall and operate the equipment in a dry, well-ventilated location.\u003c\/li\u003e\n\u003cli\u003eStop using the battery immediately if it shows abnormal heat, swelling or other signs of a fault.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended where access to individual cell connections is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBattery warranty\u003c\/h2\u003e\n\u003cp\u003e10-year New Zealand local warranty on the included battery. Warranty coverage for each package component remains subject to the applicable product warranty terms.\u003c\/p\u003e","brand":"MICROMALL","offers":[{"title":"Default Title","offer_id":64730668564851,"sku":"Pac-BTL-25.6V110-BP","price":874.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8145\/9059\/files\/24v110.png?v=1790230062","url":"https:\/\/www.micromall.co.nz\/products\/btl-25-6v110-bp","provider":"Micromall Solar","version":"1.0","type":"link"}