High-quality MC4 Solar Connectors (1 pair of male/female ports) for $3.89.
Unlike others on the market, these connectors set the industry standard for PV solar connections.
They ensure a watertight seal for 2.5/4/6mm2 PV cables, perfect for solar panel or wind turbine connections.
Bulk orders are welcome; contact us for more.
24V 55Ah Lithium Battery LiFePO4 Battery Deep Cycle Battery Solar Battery
Key Features:
Latest Generation Cells: Incorporates the newest and safest global CATL cells.
Extended Life: Offers up to 6000 cycles at 80% DOD with a projected lifespan exceeding 20 years.
Precision BMS: Features patented 3-BMS system for precise cell voltage display and balance, with a 0.004mV difference.
Warranty: Enjoy peace of mind with a 6-year full warranty, plus an additional 4-year repair warranty.
Connectivity: Enhanced with the latest Bluetooth 5.1.
Versatile Compatibility: Works seamlessly with caravan charging systems, as well as lead acid and lithium chargers.
Water-resistant
Performance:
Powerful: Provides a robust output up to 1.2kW for high energy demands.
High Energy Density: Superior to lead acid batteries, offering notable energy density and weight savings.
Applications:
Perfect for RVs, solar storage, yachts, vehicles, and water pumps. It's designed for direct replacement without the need for circuit modifications.
Enhanced Performance:
Expect longer cycle life, rapid recharging, and excellent discharge rates. Its triple BMS systems protect against over-discharge, over-charge, and short circuits.
Main Parameter
Capacity: Max 55Ah
Nominal Voltage: 25.6V
Operating Voltage: 21.6 - 28.8V
Energy: 1.4kWh
Usable Energy: 1.25kWh
Charge/Discharge Current:
Recommend 25A
Max: 50A
Peak: 200A (500ms, 25°C)
Short-circuit: 1.444KA (1.12ms, 25°C)
Recommend Depth of Discharge: 90%
Dimension (D/W/H): 330 x 215 x 172mm
Weight Approximate: 11kg
Cycle Life: 6000
Introducing our newest 12V 200Ah (210Ah max) LiFePO4 lithium iron phosphate battery, featuring the latest CATL cell technology, renowned as the world's safest.
Enjoy a robust 10-year full warranty plus an additional 5-year repair warranty. These batteries boast an impressive 8000 cycle lifespan, lasting up to 20 years. Uniquely designed to be compatible with standard car lead acid chargers and alternators.
Our deep cycle LiFePO4 battery, sized at 12V 200Ah, offers a modern solution for energy storage, matching conventional battery sizes but with superior energy density and significant weight reduction. Ideal for RVs, solar systems, cars, and water pumps, these batteries can directly replace traditional batteries without any circuit modifications.
Our LiFePO4 batteries feature a high cycle life, higher maximum discharge rates, and faster recharge times compared to lead-acid batteries. Each comes with an integrated Battery Management System (BMS) for protection against over-discharge, overcharge, and short circuits, enhancing safety and prolonging battery life.
Key Features:
80% efficiency after 6000 deep cycles
BMS protection system with built-in voltmeter
Automatic overload and short circuit protection
Continuous discharge current of max 230 amps
Over-discharge and overcharge protection
Specifications:
Battery Chemistry: LiFePO4
Capacity(Ah): Max 210Ah
Nominal Voltage (V): 12.8V
Operating Voltage(V): 10.8 - 14.4V
Energy(kWh): 2.6kWh
Usable Energy(kWh): 2.4kWh
Charge/Discharge Current
Recommend: 80A
Max: 180A
Peak: 300A (500ms, 25°C)
Short-circuit 1.444KA (1.12ms, 25°C)
Recommend Depth of Discharge: 90%
Weight: 27kg each battery
Size: 355mm L x 230mm W x 235mm H
This package includes two batteries.
3-Year Warranty
**DO NOT mix new and old batteries of any type except lithium batteries! This will cause the new battery to deteriorate much faster.
Revolutionize your power with the Micromall Ultra Carbon Battery - 12V 170Ah/200Ah (C10: 170Ah, C100: 200Ah). With a remarkable 2400 cycles at 60% depth of discharge, it offers triple the lifespan compared to lead-acid AGM and gel batteries.
Ideal for upgrading Caravans, motorhomes, boat battery systems, and solar storage setups, Micromall Ultra Lead Carbon Batteries outshine other lead-acid batteries. They're also compatible with Deep Cycle Flooded, AGM, and GEL Cell Batteries for campervans and solar storage systems.
Key advantages of lead carbon batteries include an impressive 7000-cycle lifespan at 30% depth of discharge, 2400 cycles at 60% depth of discharge, an extended 20-year lifespan, and resistance to sulfation.
Specifically designed for energy storage and hybrid energy systems, Micromall Ultra Lead Carbon Batteries incorporate high-capacitance carbon materials into the negative electrode. This unique combination offers the benefits of both lead-acid batteries and supercapacitors, including high energy density, high power, rapid charge/discharge, and extended cycle lifespans. These batteries are a cost-effective and high-performance solution for off-grid solar storage.
Micromall Ultra Lead Carbon Batteries are perfect for various applications:
Solar power generation (grid/off-grid)
Renewable energy storage
Smart power grids and micro-grids
Distributed energy storage
Generators
Hybrid energy storage
Home energy storage
Emergency lighting systems
Specifications:
Voltage: 12V
C10: 170Ah
C100: 200Ah
Dimensions (L x H x W): 540mm x 125mm x 350mm
Charge Voltage: 14.4V
Standby Voltage: 13.2V
Weight: 61.00kg
IP Rating of Enclosure: IP21
This listing includes one battery and a premium tester.
M2-500 500W Wind Turbine
(Pole Not Included)
Features:
Low Start-up Wind Speed: Special-shaped magnet and unique winding structure allow the turbine to start at just 2.5 m/s (for 5-blade version: 1.5 m/s) without any auxiliary starting device.
Quiet Operation: Nylon fiber blades and aerodynamic design ensure smooth and low-noise performance.
Compact & Lightweight: Rare earth permanent magnets reduce the overall volume and weight of the turbine.
High Efficiency: Delivers 100% full output power with extremely high energy conversion efficiency.
Durable & Consistent Quality: Molded construction ensures stable quality and long-term reliability.
Comprehensive Protection: Built-in protections against over-voltage, over-discharge, over-current, and strong wind conditions.
Robust Construction: Die-cast aluminum casing offers excellent corrosion resistance.
Weatherproof: Fully sealed design prevents intrusion from sand, salt spray, and rainwater.
Long Lifespan: Unique heat dissipation structure extends the design life to 15–20 years.
Applications:
Ideal for LED lighting, street signals, security cameras, outdoor telecommunication systems, and off-grid residences. Easily integrates with solar panels to form a wind & solar hybrid off-grid power system, providing consistent and clean energy. Available in 24V for battery charging.
Specifications:
Model Name: M2-500
Rated Power: 500W
Maximum Power: 530W
Rated Voltage: 12V
Start-up Wind Speed: 2.5 m/s
Rated Wind Speed: 11.5 m/s
Net Weight: 20 kg
Wind Wheel Diameter: 1.65 m
Number of Blades: 3
Blades Material: Nylon Fibre
Generator Type: Three-phase Permanent Magnet AC Generator
Magnet: NdFeB Rare Earth
Controller System: Electromagnetic
Speed Regulation: Automatic windward adjustment
Working Temperature: -40℃ to 80℃
Note: Pole not included.
Introducing the New Uninterruptible Power Supply Low-Frequency Pure Sine Inverter!
As a specialized solar service company, we offer quality products and comprehensive support. Our expertise ensures professional, efficient system design solutions tailored to your needs.
Inverter Uses:
Suitable for PV systems.
Ideal for RV modifications.
Compatible with lithium batteries.
Product Features:
Continuous power output.
Universal socket design for all appliance connections.
Fully isolated input and output.
Transformer isolation for power.
Optocoupler isolation for signals.
Independent auxiliary power.
High efficiency over 93%.
Constant power output with real short circuit protection.
SMT chip technology for reliable, stable output.
PWM regulated power, output voltage ±3%.
Specifications:
Rated Power: 6000W
Peak Power: 22000W
Battery Voltage: 48V
Dimensions: 650×220×180 mm
Weight: 39kg
AC Input Voltage Range: 170-260VAC (220V), 85-130VAC (110V)
Input Frequency: 45-65Hz
Battery Voltage Range: 48V
Output Voltage Range: 230V/240V±3% (Inverter mode)
Output Frequency: 50/60±1%
Utility Output Frequency Range: 50 Hz/60 Hz auto-tracking
Output Waveform: Pure sine wave
Efficiency: >85%
Transfer Time: ≤5ms
Compatible Battery Types: Lead-acid, colloidal, lithium-iron, ternary lithium, unconventional batteries
Charging Voltage Range: 48VDC
Protections: Short circuit, high/low voltage, overcharge, overload, high temperature
Overload Protection: Stops at 110%-120% load after 60 seconds, at 150% load after 10 seconds.
New Low-Frequency Pure Sine Wave Uninterruptible Power Supply Inverter Now Available!
As a solar service company focused on technical excellence, we provide high-quality products, extensive service, and support, creating customized, efficient system designs based on your unique needs.
This inverter is versatile:
Ideal for PV systems.
Suitable for RV modifications.
Compatible with lithium batteries.
Key Features:
Continuous power output.
Universal socket design for all appliance connections.
Fully isolated input and output.
Transformer isolation for power.
Optocoupler isolation for signals.
Independent auxiliary power supply.
High efficiency over 93%.
Constant power output with real short-circuit protection.
SMT chip technology for reliable, stable output.
PWM regulated power, output voltage ±3%.
Specifications:
Rated Power: 5000W
Peak Power: 20000W
Battery Voltage: 36V
Dimensions: 650 x 220 x 180 mm
AC Input Voltage Range: 170-260VAC (220V), 85-130VAC (110V)
Input Frequency: 45-65Hz
Battery Voltage Range: 22.5-49.5VDC
Output Voltage Range: 110V/120V/220V/230V/240V±3% (Inverter mode)
Output Frequency: 50/60±1%
Utility Output Frequency Range: 50Hz/60Hz auto tracking
Output Waveform: Pure sine wave
Efficiency: >85%
Transfer Time: ≤5ms
Compatible Battery Types: Lead-acid, colloidal, lithium-iron, ternary lithium, unconventional batteries
Charging Voltage Range: 12-15.5VDC
Protection Functions: Short circuit, high/low voltage, overcharge, overload, high temperature
Overload Protection: Stops at 110%-120% load after 60 seconds, at 150% load after 10 seconds.
Introducing the New Uninterruptible Power Supply Low-Frequency Pure Sine Inverter!
As a specialized solar service company, we offer quality products and comprehensive support. Our expertise ensures professional, efficient system design solutions tailored to your needs.
Inverter Uses:
Suitable for PV systems.
Ideal for RV modifications.
Compatible with lithium batteries.
Product Features:
Continuous power output.
Universal socket design for all appliance connections.
Fully isolated input and output.
Transformer isolation for power.
Optocoupler isolation for signals.
Independent auxiliary power.
High efficiency over 93%.
Constant power output with real short circuit protection.
SMT chip technology for reliable, stable output.
PWM regulated power, output voltage ±3%.
Specifications:
Rated Power: 6000W
Peak Power: 22000W
Battery Voltage: 24V
Dimensions: 650×220×180 mm
Weight: 39kg
AC Input Voltage Range: 170-260VAC (220V), 85-130VAC (110V)
Input Frequency: 45-65Hz
Battery Voltage Range: 24V
Output Voltage Range: 230V/240V±3% (Inverter mode)
Output Frequency: 50/60±1%
Utility Output Frequency Range: 50 Hz/60 Hz auto-tracking
Output Waveform: Pure sine wave
Efficiency: >85%
Transfer Time: ≤5ms
Compatible Battery Types: Lead-acid, colloidal, lithium-iron, ternary lithium, unconventional batteries
Charging Voltage Range: 24VDC
Protections: Short circuit, high/low voltage, overcharge, overload, high temperature
Overload Protection: Stops at 110%-120% load after 60 seconds, at 150% load after 10 seconds.
Uninterruptible Power Supply Low-Frequency Pure Sine Inverter has Arrived!
heavy duty, 23kg 5 years warranty
We are a technically oriented solar service company that provides quality products, extensive service and support to our customers.
With years of accumulated expertise and rich experience, we will create professional and efficient system design solutions for you according to your different needs.
This inverter can be:
1 Used for PV system
2 Suitable for RV modification
3 Compatiblelithium battery
Product features.
1.Continuous power output
2.universal socket design, suitable for all appliances connected to use
3.input & output completely isolated
4.power: transformer isolation
5.Signal: Optocoupler isolation
6.Independent auxiliary power supply
7.Excellent efficiency, greater than 93%
8.Constant (limited) power output, real short circuit protection
9.SMT chip technology, reliable quality, stable output
10.PWM regulated power, output voltage ± 3%
Rated power：3000W
peak power：12000W
voltage：24V
Dimension L×W×H:460×220×180（mm）
ACInputvoltagerange(VAC):170-260VAC（220V) 85-130VAC(110V)
Inputfrequency(Hz):45-65HZ
Battery voltage range:24v
Outputvoltage range(VAC):Inverter mode 110V/120V/220V/230V/240V±3%
Outputfrequency(Hz）:50/60±1%.
Utility output frequency range:50 Hz/60 Hz automatic tracking
Output waveform:Pure sine wave
Efficiency:＞85%
Transfer time(ms):≤5ms
Compatible battery type:Lead-acid batteries/colloidal batteries/lithium-iron batteries/ternary lithium batteries/unconventional batteries
Protection function:Short circuit protection; high voltage protection; low voltage protection; overcharge protection; overload protection; high temperature protection
Overload protection:Overload 110% - 120% of the inverters will stop after 60 seconds, and over-load 150% of the inverters will stop after 10 seconds.
Introducing the New High-End LED Dimmer, Specially Designed for the AU/NZ Market.
This LED dimmer supports both 1 and 2-way switch connections. Its elegant design and high precision capacitance control chip offer easy installation, simplicity in use, and compatibility with a wide range of LED lights. Ideal for LED lighting, ceiling lights, downlights, panel lights, tubes, bulb lights, and TRIAC dimming lamps (must have a dimmable label).
Features:
High-grade, wear-resistant plastic construction, environmentally friendly and safe.
Clear, convenient brightness adjustment with marked switch panel.
Large, easy-grip rotary knob for comfortable use and free rotation.
Simple installation, exceptional quality, fine workmanship, and stylish design, making it perfect for home, office, or hotel use.
Specifications:
Condition: Brand New
2-Way Switch Connection
Material: Plastic
Color: White
Input Voltage: 240V
Power Frequency: 50Hz-60Hz
Maximum Load Power: 200W
Rotary Angle: 320 degrees
Relative Humidity: 85%
Operating Temperature: -10℃ to 50℃
Life Span: >80,000 cycles
Certifications: CE, RoHS, SAA, SDOC
Package Weight: Approx. 75g
Package Includes:
1 x Rotary Dimmer Switch
Submersible Solar Power Pump System 750W
This is brand new submersible solar power pump with 90%+ solar energy efficiency, submersible, no need for batteries.
Warranty:
24 months warranty
Features:
Solar panel-powered pumps
submersible
not necessary to go with a battery.
3inch Centrifugal
MOTOR Permanent Magnet
Brushless
Parameters:
POWER: 750 W (1 HP)
RATED VOLTAGE: 96 VDC (42 ~ 150 VDC)
MAX. FLOW: 5,000 L/HR
MAX. HEAD 90 M
PUMP LENGTH: 55 CM
PUMP SIZE: 3 inch
OUTLET SIZE: 1.25 inch
MATERIAL & qualities:
OUTLET: 304 Stainless Steel
PUMP BODY: 304 Stainless Steel
IMPELLER: 304 Stainless Steel
MOTOR: Permanent Magnet Brushless DC Motor, Oil-filled
CONTROLLER SHELL Die-cast Aluminum Enclosure (IP67)
CONTROLLER: 32 Bit / MCU / FOC / Sine Wave, Current / MPPT
Package included:
304 Stainless Steel Submersible Solar Power Pump X1
Controller X1
440W Solar Panel Bifacial Topcon N-Type Mono Half-Cell X2
Ensure your solar installation meets safety and regulatory standards with our Solar PV Label Kit.
This comprehensive kit includes all essential labels for solar PV systems.
Designed for long-lasting use, these high-quality labels provide clear identification, ensuring compliance and safety across your solar setup.
Whether you're a professional installer or a DIY enthusiast, this kit is a must-have for any solar project.
Product: LY-2546B PV Solar Crimping Tool for MC3/MC4 Connectors
This high-quality crimping tool is designed for wire and cable crimping with MC3 and MC4 connector terminals. It's an essential tool for installing or repairing solar panel connectors efficiently.
Quantity: 1 Piece
Package Dimensions: 20.0 x 10.0 x 3.0 cm
Package Weight: 0.6 kg
The Solar Pumping System is designed for remote areas with unreliable or no access to electrical grid power. It utilizes a BLDC solar pump controller to directly harness DC power from the PV array, driving brushless DC pumps. On sunny days, it continuously pumps water without the need for batteries or energy storage devices. It's recommended to pump water into a reservoir for storage.
The portable QB pump includes a built-in controller with highly efficient MPPT functionality, eliminating the need for a separate controller installation. Simply connect the panels to the pump wires, and it operates directly and consistently during daylight hours, even on cloudy days.
Key Features:
MPPT controller build-in
Comes with a 1-year warranty
***Maximum pumping distance of 50 meters***
Max head: 50 meters
Power: 500 watts
Designed with reliability in mind, the controller ensures water delivery under adverse conditions by reducing output to protect system components, only shutting down in extreme cases. Normal operation is automatically restored when conditions improve.
Material:
MOTOR: Full Oil Permanent Magnet, Brushless DC Motor (Hall-free)
CONTROLLER: 32bit MCU / FOC / Sine Wave Current / MPPT
Pump Body/OUTLET/INLET: Cast Iron
MOTOR BODY: Die-cast Aluminium
IMPELLER: Brass
SCREW: 304 Stainless Steel
Technical Parameters:
Max head: 50 meters
Pipe diameter: 25mm
Rated Voltage: 48 VDC (30 - 80 VDC)
Max Flow: 2100L/HR
Max Suction: 8 meters
Packing Size: 29x16x24 CM
Gross Weight: 5 KGS
Maximum power at STC(Pmax): 300Wp
Voltage at Pmax(Vmp): 34.72V
Current at Pmax(Imp): 8.64A
Open-Circuit Voltage(Voc): 40.32V
Short-Circuit Current(Isc): 9.72A
Normal Operating Cell Temp(NOCT): 45 + 2°C
Maximum System Voltage: 1000V
Operating Temperature: -40°C to + 85°C
Application Class: Class A
Weight: 16kg
Dimension: 1545 x 880 x 30mm
Package Included:
1X Solar Pump (MPPT controller included)
2X Premium Quality Grade A+ 300w 12V/24V/31.5V Mono Solar Panel
1x 5m Twin Core Solar Cable
Our Solar Pumping System is designed for remote areas with unreliable or no electrical grid access. It uses a BLDC solar pump controller powered by DC from the PV array to drive brushless DC pumps. On sunny days, it continuously pumps water without batteries. Recommended for water storage.
The portable QB pump has a built-in MPPT controller—no separate installation needed. Just connect panels to pump wires for seamless daytime operation, even on cloudy days.
Key Features:
Built-in MPPT controller.
1-year warranty.
Max pumping distance: 50 meters.
Reliable design operates under adverse conditions, adjusting output to protect components. Shuts down only in extreme cases, automatically restoring full operation when conditions improve.
Materials:
MOTOR: Full Oil Permanent Magnet Brushless DC Motor (Without Hall)
CONTROLLER: 32-bit MCU / FOC / Sine Wave Current / MPPT
Pump Body/OUTLET/INLET: Cast Iron
MOTOR BODY: Die-cast Aluminium
IMPELLER: Brass
SCREW: Stainless Steel
CABLE: 2m Three-core copper cable / 2.0mm2
Technical Specs:
Max lift water head: 25 meters
Max flow rate: 2 m³/h
Pipe diameter: 25mm
Rated Voltage: 24 VDC
Max Open Voltage: 80 VDC
Under Protection Voltage: 17 VDC
Over Protection Voltage: 50 VDC
Rated Current: 12 A
Over Protection Current: 15 A
Peak Protection Current: 18 A
MCU and Controller Mode: 32-bit MCU / FOC / Sine Wave Current / MPPT
Cooling: Natural Heat Dissipation
Operating temperature: -20℃ ~ +50℃
Package Includes:
1X Solar pump with built-in MPPT controller
2X LONGi LR5-28HTH 225W Mono Solar Panel Low Light Performance (12 Years Material Workmanship Warranty, 25 Years Linear Power Output Warranty)
1x 5m Twin Core Solar Cable
**Lithium Battery Lables included**
Ensure your solar installation meets safety and regulatory standards with our Solar Label Kit - Value Pack.
This comprehensive kit includes all essential labels for solar systems, including durable Lithium Battery Labels for identifying your battery components.
Designed for long-lasting use, these high-quality labels provide clear identification, ensuring compliance and safety across your solar setup.
Whether you're a professional installer or a DIY enthusiast, this kit is a must-have for any solar project.
Solar Battery Label Kit
Ensure your solar installation meets safety and regulatory standards with our Solar Battery Label Kit.
Designed for long-lasting use, these high-quality labels provide clear identification, ensuring compliance and safety across your solar setup.
Whether you're a professional installer or a DIY enthusiast, this kit is a must-have for any solar project.
Smart Charge Relay Dual Battery Isolator 12V 140A Voltage Sensitive Split Relay VSR Car Charging Two Battery Bank
High Quality 12V 140A Split Charge VSR
The Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time. When the engine is started and the start battery reaches 13.3 volts, the VSR engages, allowing two battery banks (start and house) to be charged simultaneously.
When the voltage drops below 12.8 volts (eg the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects sensitive electronic equipment powered from the house battery from harmful engine start up spikes.
Features:
Voltage sensitive relay12 volt 140 ampRed LED indicator.Allows split charging of the 2nd battery bank without discharging the primary/start battery.The relay makes at 13.3 volts and breaks at 12.8 volt.
Advantages of fitting a VSR over conventional charge (diode isolators). Easy 3 wire connection at the battery. No need to bypass existing alternator wiring. VSR have no volt drop. Conventional diode isolators incur a minimum of 0.6 volt drop. Compact size - No large heat sink Cost effective solutionQuality products; affordable prices
Dimensions:
68mm (L) x 68mm (W) x 52mm (H)
12 Months Warranty
High-Quality 6mm2 Twin Core Solar Cable with UV Protection - AS/NZS & IEC Certified - Available Per Meter
Ensuring safe and efficient solar installations, our Premium 6mm2 Twin Core Solar Cable is crafted in NZ & Australia adhering to the highest standards. This cable is certified according to AS/NZS5033/1660.5.1/1660.5.2/1660.5.4/1660.5.6/3008.1/1125 AND IEC, providing reliable power transmission between your solar panels and controller, especially suitable for distances up to 7-9 meters.
Features:
Dual Lines: Combined Positive and Neutral lines for neat cable management in your RV.
UV-Protected: Premium UV TUV approved polymer sheathing withstands harsh NZ conditions.
AS/NZS & IEC Certified: Adheres to multiple standard certifications ensuring safety and quality.
Customizable Length: Tailored to your specific needs, priced per meter.
MC4 Compatibility: Can be fitted with MC4 Connectors and Fuses as required, ensuring secure connections and added safety.
Choose our solar cable for a trustworthy, durable solution, and prevent risks such as fire by never compromising on cable quality.
Customization available: We can prepare the cable to your desired length and attach MC4 connectors as per your requirement. Simply inquire, and we can create a tailored listing for you.
High-Quality, Flexible 5m 6.00mm² Solar Extension Cable with MC4 Connectors and 25-Year Warranty
**Twin Core Cable**
Introducing our premium 5m solar extension cable, featuring a 6.00mm² cross-sectional area and equipped with 2 MC4 connectors, designed for seamless connectivity in your solar power stations, PV connectors, and PV junction boxes.
Key Features:
Flexibility & Ease: User-friendly flexibility and easy stripping capabilities.
Extended Warranty: Enjoy peace of mind with a generous 25-year warranty.
All-Weather Durability: Double insulation jackets ensure adaptability and functionality in all weather conditions.
Optimal Performance: Exemplary abrasion resistance, softness, stripping, and high current carrying capacity.
Broad Applicability: Suitable for various solar-related applications and installations.
MC4 Connector Specifications:
Maximum Working Current: 25A (6mm²)
Maximum Working Voltage: DC1000V
Contact Resistance: ≤0.5mΩ
Insulation Resistance:
High-Quality, Flexible 5m 4.00mm² Solar Extension Cable with MC4 Connectors and 25-Year Warranty
**Twin Core Cable**
Introducing our premium 5m solar extension cable, featuring a 4.00mm² cross-sectional area and equipped with 2 MC4 connectors, designed for seamless connectivity in your solar power stations, PV connectors, and PV junction boxes.
Key Features:
Flexibility & Ease: User-friendly flexibility and easy stripping capabilities.
Extended Warranty: Enjoy peace of mind with a generous 25-year warranty.
All-Weather Durability: Double insulation jackets ensure adaptability and functionality in all weather conditions.
Optimal Performance: Exemplary abrasion resistance, softness, stripping, and high current carrying capacity.
Broad Applicability: Suitable for various solar-related applications and installations.
MC4 Connector Specifications:
Maximum Working Current: 25A (4mm²)
Maximum Working Voltage: DC1000V
Contact Resistance: ≤0.5mΩ
Insulation Resistance:
High-Quality 4mm2 Twin Core Solar Cable with UV Protection - AS/NZS & IEC Certified - Available Per Meter
Ensuring safe and efficient solar installations, our Premium 4mm2 Twin Core Solar Cable is crafted in NZ & Australia adhering to the highest standards. This cable is certified according to AS/NZS5033/1660.5.1/1660.5.2/1660.5.4/1660.5.6/3008.1/1125 AND IEC, providing reliable power transmission between your solar panels and controller, especially suitable for distances up to 7-9 meters.
Features:
Dual Lines: Combined Positive and Neutral lines for neat cable management in your RV.
UV-Protected: Premium UV TUV approved polymer sheathing withstands harsh NZ conditions.
AS/NZS & IEC Certified: Adheres to multiple standard certifications ensuring safety and quality.
Customizable Length: Tailored to your specific needs, priced per meter.
MC4 Compatibility: Can be fitted with MC4 Connectors and Fuses as required, ensuring secure connections and added safety.
Choose our solar cable for a trustworthy, durable solution, and prevent risks such as fire by never compromising on cable quality.
Customization available: We can prepare the cable to your desired length and attach MC4 connectors as per your requirement. Simply inquire, and we can create a tailored listing for you.
High-Quality, Flexible 30m 6.00mm² Solar Extension Cable with MC4 Connectors and 25-Year Warranty
**Twin Core Cable**
Introducing our premium 30m solar extension cable, featuring a 6.00mm² cross-sectional area and equipped with 2 MC4 connectors, designed for seamless connectivity in your solar power stations, PV connectors, and PV junction boxes.
Key Features:
Flexibility & Ease: User-friendly flexibility and easy stripping capabilities.
Extended Warranty: Enjoy peace of mind with a generous 25-year warranty.
All-Weather Durability: Double insulation jackets ensure adaptability and functionality in all weather conditions.
Optimal Performance: Exemplary abrasion resistance, softness, stripping, and high current carrying capacity.
Broad Applicability: Suitable for various solar-related applications and installations.
MC4 Connector Specifications:
Maximum Working Current: 25A (6mm²)
Maximum Working Voltage: DC1000V
Contact Resistance: ≤0.5mΩ
Insulation Resistance:
High-Quality, Flexible 30m 6.00mm² Solar Extension Cable with MC4 Connectors and 25-Year Warranty
**Twin Core Cable**
Introducing our premium 30m solar extension cable, featuring a 6.00mm² cross-sectional area and equipped with 2 MC4 connectors, designed for seamless connectivity in your solar power stations, PV connectors, and PV junction boxes.
Key Features:
Flexibility & Ease: User-friendly flexibility and easy stripping capabilities.
Extended Warranty: Enjoy peace of mind with a generous 25-year warranty.
All-Weather Durability: Double insulation jackets ensure adaptability and functionality in all weather conditions.
Optimal Performance: Exemplary abrasion resistance, softness, stripping, and high current carrying capacity.
Broad Applicability: Suitable for various solar-related applications and installations.
MC4 Connector Specifications:
Maximum Working Current: 25A (6mm²)
Maximum Working Voltage: DC1000V
Contact Resistance: ≤0.5mΩ
Insulation Resistance: <500MΩ
Single-Core Cable Cross-Section: 6mm²
Ambient Temperature: -40℃ ~ +105℃
Protection Class: IP67
Safety Class: II
Operating Temperature: -40℃ ~ +85℃
Insertion/Withdrawal Force: ≤50N/≥50N
Insulation Material: PC (Black)
Contact Material: Copper CN, Sn Nickel
Flammability Rating: UL94-VO
Terminal Connection: Crimp
Cable Attributes:
Rated Voltage: 600V/1800V (AC/DC)
Ambient Temperature Range: -40℃ ~ +125℃
Strand Design: 84/0.30
Available Cable Length: 30M
Package Includes:
1 x 12 AWG Solar Extension Cable with Male and Female MC4 Connectors
Note: Please be aware that light shooting and various displays may slightly alter the item’s color compared to photos. Allow for a measurement error of +/-1-3cm."
Feel free to adjust any specification or detail to match the product's exact features and benefits. This description encapsulates all the necessary information, maintaining clarity and conciseness for optimal customer understanding.
