**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**10 Years Warranty**
SUN-8K-G02P1-AU-AM2 | 8kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.7%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-8K-G02P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 12
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 18+26
Max. Input Short Circuit Current (A): 27+39
No. of MPP Trackers/ No. of Strings MPP Tracker: 2/1+2
AC Output Side
Rated AC Output Active Power (kW): 8
Max. AC Output Apparent Power (kVA): 8
Rated AC Output Current (A): 34.8
Max. AC Output Current (A): 34.8
Rated Output Voltage/Range (V): 230
Efficiency
Max. Efficiency: 97.7%
Euro Efficiency: 97.2%
MPPT Efficiency: >99%
Equipment Protection
DC Polarity Reverse Connection Protection
AC Output Overcurrent Protection
AC Output Overvoltage Protection
AC Output Short Circuit Protection
Thermal Protection
DC Terminal Insulation Impedance Monitoring
DC Component Monitoring
Ground Fault Current Monitoring
Power Network Monitoring
Island Protection Monitoring
Earth Fault Detection
Overvoltage Load Drop Protection
Residual Current (RCD) Detection
Arc Fault Circuit Interrupter (AFCI): Optional
Interface
Communication Interface: RS485
Monitor Mode: GPRS/WIFI/Bluetooth/4G/LAN(optional)
General Data
Operating Temperature Range (°C): -25 to +60°C, >45°C Derating
Cabinet Size (WxHxD mm): 330x310x208.5 (Excluding Connectors and Brackets)
Weight (kg): 12.1
Warranty: 10 Years
Grid Regulation: AS/NZS 4777.2
Safety EMC/Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-6K-G05P1-AU-AM2 | 6kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-6K-G05P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 9
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 18+18
Max. Input Short Circuit Current (A): 27+27
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1+1
AC Output Data
Rated AC Output Active Power(kW): 6
Max. AC Output Apparent Power(kVA): 6
Rated AC Output current (A): 26.1
Max. AC Output Current(A): 26.1
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 305×280×180mm
Weight: 7.7kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-6K-G04-AU | 6kW | Single Phase | 2 MPPT
Higher yields / Safe & Reliable / Smart / User-friendly
1 MPP tracker, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-6K-G04-AU
PV String Input Data
Max. PV Input Power (kW): 9
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 13+13
Max. Input Short Circuit Current (A): 19.5+19.5
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1
AC Output Data
Rated AC Output Active Power(kW): 6
Max. AC Output Apparent Power(kVA): 6
Rated AC Output current (A): 26.1
Max. AC Output Current(A): 26.1
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 330×323×190mm
Weight: 8kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-5K-G05P1-AU-AM2 | 5kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-5K-G05P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 7.5
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 18+18
Max. Input Short Circuit Current (A): 27+27
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1+1
AC Output Data
Rated AC Output Active Power(kW): 5
Max. AC Output Apparent Power(kVA): 5
Rated AC Output current (A): 21.8
Max. AC Output Current(A): 21.8
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 305×280×180mm
Weight: 7.7kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-5K-G04-AU | 5kW | Single Phase | 2 MPPT
Higher yields / Safe & Reliable / Smart / User-friendly
1 MPP tracker, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-5K-G04-AU
PV String Input Data
Max. PV Input Power (kW): 7.5
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 13+13
Max. Input Short Circuit Current (A): 19.5+19.5
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1
AC Output Data
Rated AC Output Active Power(kW): 5
Max. AC Output Apparent Power(kVA): 5
Rated AC Output current (A): 21.7
Max. AC Output Current(A): 21.7
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 330×323×190mm
Weight: 8kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-3.6K-G04-AU | 3.6kW | Single Phase | 2 MPPT
Higher yields / Safe & Reliable / Smart / User-friendly
1 MPP tracker, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-3.6K-G04-AU
PV String Input Data
Max. PV Input Power (kW): 5.4
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 13+13
Max. Input Short Circuit Current (A): 19.5+19.5
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1
AC Output Data
Rated AC Output Active Power(kW): 3.6
Max. AC Output Apparent Power(kVA): 3.6
Rated AC Output current (A): 13
Max. AC Output Current(A): 13
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 330×323×190mm
Weight: 8kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**10-Year Warranty**
SUN-25K-G05-AU | 25kW | Three Phase | 2 MPPT
Higher yields / Safe & Reliable / Smart / User-friendly
Smart Monitoring Platform
Thanks to the smart monitoring platform, Deye full series inverter products support remotely shutdown immediately when accident occurs.Setting parameters and FW update remotely, which makes PV plant O&M easier.
2 MPP tracker, Max. efficiency up to 98.6%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Model: SUN-25K-G05-AU
PV String Input Data
Max. PV Input Power (kW): 37.5
Max. PV Input Voltage (V): 1100
Start-up Voltage (V): 250
MPPT Voltage Range (V): 200-1000
Rated PV Input Voltage (V): 600
Max. Operating PV Input Current (A): 26+26
Max. Input Short Circuit Current (A): 39+39
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/2+2
AC Output Data
Rated AC Output Active Power(kW): 25
Max. AC Output Apparent Power(kVA): 25
Rated AC Output current (A): 36.2
Max. AC Output Current(A): 36.2
Efficiency
Max. Efficiency: 98.5%
Euro Efficiency: 98%
MPPT Efficiency: >99%
General Date
Cabinet Size ( mm): 362W×527H×220D (Excluding Connectors and Brackets)
Weight (kg): 20
Warranty: 10 Years
Grid Regulation: AS/NZS 4777.2
Safety EMC/Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
Higher yields / Safe & Reliable / Smart / User-friendly
This series inverter is specially designed for three-phase PV systems, covering a wide power range of 4kW, 5kW, 6kW, 7kW, 8kW, 10kW, 12kW. With compactness design, it is easy to install and operate. It supports wide AC output voltage to ensure longer working hour.
**5 Years Manufacturer Warranty + 5 Years Local Warranty**
Remotely shutdown function
Smart Monitoring Platform
Thanks to the smart monitoring platform, Deye full series inverter products support remotely shutdown immediately when accident occurs.Setting parameters and FW update remotely, which makes PV plant O&M easier.
2 MPPT tracker, Max. efficiency up to 98.3%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Specifications:
Model: SUN-10K-G05
Max PV Input Power: 15 kW
Max PV Input Voltage: 550 V
Start-up DC Input Voltage: 80 V
MPPT Operating Range: 70V to 500V
Max PV Input Current: 13A + 13A
Max Short Circuit Current: 19.5A + 19.5A
MPPT/Strings per MPPT: 2/1
Rated Output Power: 10 kW
Max Active Power: 10 kW
Rated Grid Frequency: 45 / 55 Hz (Optional)
Rated AC Grid Output Current: 14.5 A
Max AC Output Current: 14.5 A
Efficiency: Max. 98.3%
Dimensions: 332W x 457H x 203D mm
Weight: 11 kg
The Deye SUN-10K-G05 is specifically tailored for three-phase PV systems, offering a blend of high efficiency, smart functionality, and user-friendly design for an optimal solar energy experience.
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**10 Years Warranty**
SUN-10K-G02P1-AU-AM2 | 10kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.7%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-10K-G02P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 15
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 26+26
Max. Input Short Circuit Current (A): 39+39
No. of MPP Trackers/ No. of Strings MPP Tracker: 2/2+2
AC Output Side
Rated AC Output Active Power (kW): 9.99
Max. AC Output Apparent Power (kVA): 9.99
Rated AC Output Current (A): 43.5
Max. AC Output Current (A): 43.5
Rated Output Voltage/Range (V): 230
Efficiency
Max. Efficiency: 97.7%
Euro Efficiency: 97.2%
MPPT Efficiency: >99%
Equipment Protection
DC Polarity Reverse Connection Protection
AC Output Overcurrent Protection
AC Output Overvoltage Protection
AC Output Short Circuit Protection
Thermal Protection
DC Terminal Insulation Impedance Monitoring
DC Component Monitoring
Ground Fault Current Monitoring
Power Network Monitoring
Island Protection Monitoring
Earth Fault Detection
Overvoltage Load Drop Protection
Residual Current (RCD) Detection
Arc Fault Circuit Interrupter (AFCI): Optional
Interface
Communication Interface: RS485
Monitor Mode: GPRS/WIFI/Bluetooth/4G/LAN(optional)
General Data
Operating Temperature Range (°C): -25 to +60°C, >45°C Derating
Cabinet Size (WxHxD mm): 330x410x213.5 (Excluding Connectors and Brackets)
Weight (kg): 14.8
Warranty: 10 Years
Grid Regulation: AS/NZS 4777.2
Safety EMC/Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
DEYE WiFi Plug Stick Logger LSW-3
Characteristics:
Type: WiFi Plug Stick Logger
Model: LSW-3
Connectivity: WiFi
Installation: Plug & Play
Compatibility: Compatible with DEYE inverters
Monitoring: Real-time
Operating Range: Wide Range for Stable Wireless Connection
Energy efficiency: Low energy consumption
Dimensions: Compact design for easy installation
Warranty: 2 years
Application:
The DEYE WiFi Plug Stick Logger LSW-3 is designed for wireless monitoring of DEYE inverters. This device offers an easy and fast way to connect and monitor the performance of your PV system in real-time. With the help of a WiFi connection, users can monitor the parameters of their inverters through a mobile application or web platform, thus gaining access to important information about the status of the system and energy production. Ideal for home and small commercial installations that want to optimize the efficiency and reliability of their solar systems.
**Vector Approved Inverter**
**10-Year Warranty**
ASW8000-S-A | 8kW | Single Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick and easy to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Built to international quality standards, featuring an integrated DC switch and an IP66-rated design for reliable outdoor performance.
User-friendly
Supports 16 A input current—ideal for bifacial and large-area PV modules—with 3 MPPTs for flexible array design and ShadeSol technology for enhanced performance in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 12000 Wp STC
Max. input voltage: 600V
MPP voltage range / rated input voltage: 80 V - 560 V / 360 V
Min. input voltage: 80 V
Initial. feed in voltage: 100 V
Max. operating input current: 16A
Max. short circuit current: 22.5A
No. of independent MPPT inputs / strings per MPPT input: 3/1
Output (AC)
Rated active power: 8000W
Rated apparent power: 8000VA
Max. apparent power: 8000VA
AC nominal voltage: 220V/230V/240V
AC voltage range: 180V to 295V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 40A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 1
Harmonic distortion (THD) at rated output: < 3%
General data
Dimensions (W / H / D): 503 / 435 / 183 mm
Weight:
**Vector Approved Inverter**
**10-Year Warranty**
ASW50K-LT-G3 | 50kW | Three Phase | 5 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Features Phoenix Contact connectors for reliable, tool-free DC connections, a compact wall-mount design, and a fuse-free architecture to reduce BOS costs. Setup, commissioning, and monitoring are streamlined via the Solplanet app
Higher Yields
Supports 150% PV array oversizing for greater energy yields, with up to 5 MPPTs for flexible system design. Handles up to 20 A input per string—ideal for bifacial and large-area PV modules—and includes ShadeSol for improved performance in shaded conditions.
Reliable & Safe
Built-in Type II AC & DC surge protection with integrated DC switches and an IP66-rated design for reliable outdoor use.
Technical Datasheet
Input (DC)
Max. PV array power: 75000 Wp STC
Max. input voltage: 1100V
MPP voltage range / rated input voltage: 200 V - 1000 V / 630 V
Min. input voltage: 200V
Initial. feed-in voltage: 250V
Max. operating input current: 40 A / 32 A / 32 A / 40 A / 32 A
Max. short circuit current: 60 A / 48 A / 48 A / 60 A / 48 A
No. of independent MPPT inputs / strings per MPPT input: 5/2
Output (AC)
Rated active power: 50000 W
Rated apparent power: 50000 VA
Max. apparent power: 50000 VA
AC nominal voltage: 220 V / 380 V 230 V / 400 V
AC voltage range: 180 V to 305 V / 312 V to 528 V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 83.6A
Adjustable power factor range: 0.8 leading to 0.8 lagging
General data
Dimensions (W / H / D): 670 / 640 / 270 mm
Weight: 42.5kg
Degree of protection (according to IEC 60529): IP66
Relative humidity (non-condensing): 100%
Climatic category (according to IEC 60721-3-4): 4K4H
Max. operating altitude: 4000m
**Vector Approved Inverter**
**10-Year Warranty**
ASW5000-S-G2 | 5kW | Single Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Complies with international quality standards, supports 150% PV array oversizing for higher energy yields, and features an IP66-rated design for dependable outdoor use.
User-friendly
Features a user-friendly app interface, 13 A input current—ideal for bifacial and large-area PV modules—and a wide MPP voltage range of 150V–1000V. ShadeSol technology ensures optimal performance even in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 7500 Wp STC
Max. input voltage: 600 V
MPP voltage range / rated input voltage: 60V-560V/360V
Min. input voltage: 60V
Initial. feed-in voltage: 100V
Max. operating input current: 16A
Max. short circuit current: 24A
No. of independent MPPT inputs /strings per MPPT input: 2/1
Output (AC)
Rated active power: 5000 W
Rated apparent power: 5000 VA
Max. apparent power: 5000 VA
AC nominal voltage: 220 V / 230 V / 240 V
AC voltage range: 180 V to 295 V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 25A
Adjustable power factor range: 1 / 0.8 leading … 0.8 lagging
Feed-in phases: 1
Harmonic distortion (THD) at rated output: < 3 %
General data
Dimensions (W / H / D): 368 / 325 / 145 mm
Weight: 9.5kg
Self-consumption (at night): < 1 W
Topology: Non-isolated
Cooling concept: Natural Convection
Degree of protection (according to IEC 60529): IP66
Climatic category (according to IEC 60721-3-4): 4K4H
Max. permissible value for relative humidity (non-condensing): 100%
Max. operating altitude: 4000m
**Vector Approved Inverter**
**10-Year Warranty**
ASW30K-LT-G3 | 30kW | Three Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Complies with international quality standards, supports 150% PV array oversizing for higher energy yields, and features an IP66-rated design for dependable outdoor use.
User-friendly
Supports 20 A input current—ideal for bifacial and large-area PV modules—with 3 MPPTs for flexible system design. A wide MPP voltage range (180V–1000V) and ShadeSol technology ensure optimal performance, even in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 45000 Wp STC
Max. input voltage: 1100V
MPP voltage range / rated input voltage: 180 V - 1000 V / 630 V
Min. input voltage: 160V
Initial. feed-in voltage: 200V
Max. operating input current: 32A / 32 A /32A
Max. short circuit current: 48 A / 48A /48A
No. of independent MPPT inputs / strings per MPPT input: 3 / A:2;B:2;C:2
Output (AC)
Rated active power: 30000W
Rated apparent power: 30000 VA
Max. apparent power: 30000 VA
AC nominal voltage: 220 V / 380 V, 230 V / 400 V, 240 V / 415 V
AC voltage range: 180 V to 305 V / 312 V to 528V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 47.8A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 3 / 3-N-PE
Harmonic distortion (THD) at rated output: < 3%
General data
Dimensions (W / H / D): 543 / 520 / 235 mm
Weight: 29kg
Self-consumption (at night): < 1 W
Topology: Non-isolated
Cooling concept: Active cooling
Degree of protection (according to IEC 60529): IP66
Climatic category (according to IEC 60721-3-4): 4K4H
Max. operating altitude: 3000 m
10 Years Warranty
Enhanced Solar Inverter for Reliable Home Energy
The Solplanet 3–6K-S-G2 series is an upgraded, single-phase inverter range engineered for dependable residential solar energy. Designed to pair seamlessly with the latest PV modules, these inverters are compact, wall-mountable, and IP66 rated — ensuring protection against dust and water in all weather conditions. Their discreet, low-noise operation makes them a natural fit for any home.
With advanced ShadeSol shadow management technology, the Solplanet 3–6K-S-G2 series maximises energy generation even in partially shaded or low-light environments. Enhanced system safety features include optional 24/7 monitoring via a user-friendly mobile app, allowing you to identify and address issues proactively.
Key Features
Reliable by Design
Built to meet international quality and safety standards, these inverters are made for long-term, trouble-free performance. IP66 protection ensures durability in harsh environments, while DC reverse polarity protection and AC-sensitive residual current monitoring deliver safe, consistent operation.
Optimised Performance
A wide MPPT voltage range and a low 60V DC input allow for highly efficient energy conversion. The system supports up to 150% PV array oversizing, making it ideal for rooftop installations of various sizes and configurations.
Fast, Flexible Installation
Installation is simple with standard tools and Phoenix Contact connectors for broad compatibility. Optional Plug & Play and 4G dongles allow internet connectivity and monitoring for up to five inverters via the Solplanet app. Users can track performance, adjust settings, and receive alerts — all from their smartphone.
Technical Highlights – ASW3000-S-G2
Max. PV array power: 4500 Wp STC
MPPT voltage range: 60V – 560V
Max. input voltage: 600V
Max. input current: 16A
Rated power output: 3000W
AC voltage range: 180 – 295V
Dimensions: 368 × 325 × 145 mm
Weight: 9.5 kg
Protection level: IP66
**Vector Approved Inverter**
**10-Year Warranty**
ASW15K-LTG2-A | 15kW | Three Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Complies with international quality standards, supports 150% PV array oversizing for higher energy yields, and features an IP66-rated design for dependable outdoor use.
User-friendly
Features a user-friendly app interface, 13 A input current—ideal for bifacial and large-area PV modules—and a wide MPP voltage range of 150V–1000V. ShadeSol technology ensures optimal performance even in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 22500 Wp STC
Max. input voltage: 1100 V
MPP voltage range / rated input voltage: 150 V to 1000 V / 630 V
Min. input voltage: 125V
Initial. feed-in voltage: 150V
Max. operating input current: 26 A / 26 A
Max. short circuit current: 40 A / 40 A
No. of independent MPPT inputs /strings per MPPT input: 2/A:2;B:1
Output (AC)
Rated active power: 15000 W
Rated apparent power: 15000 VA
Max. apparent power: 15000 VA
AC nominal voltage: 220 V / 380 V, 230 V / 400 V, 240 V / 415 V
AC voltage range: 160 V to 300 V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 24A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 3 / 3-N-PE
Harmonic distortion (THD) at rated output: < 3 %
General data
Dimensions (W / H / D): 503 / 435 / 183 mm
Weight: 17kg
Self-consumption (at night): < 1 W
Topology: Non-isolated
Cooling concept: Active cooling
Degree of protection (according to IEC 60529): IP66
Climatic category (according to IEC 60721-3-4): 4K4H
Max. permissible value for relative humidity (non-condensing): 100%
Max. operating altitude: 3000m
**Vector Approved Inverter**
**10-Year Warranty**
ASW10K-LTG2-A | 10kW | Three Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Complies with international quality standards, supports 150% PV array oversizing for higher energy yields, and features an IP66-rated design for dependable outdoor use.
User-friendly
Features a user-friendly app interface, 13 A input current—ideal for bifacial and large-area PV modules—and a wide MPP voltage range of 150V–1000V. ShadeSol technology ensures optimal performance even in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 15000 Wp STC
Max. input voltage: 1100 V
MPP voltage range / rated input voltage: 150 V to 1000 V / 630 V
Min. input voltage: 125V
Initial. feed-in voltage: 150V
Max. operating input current: 26 A / 13 A
Max. short circuit current: 40 A / 20 A
No. of independent MPPT inputs /strings per MPPT input: 2/A:2;B:1
Output (AC)
Rated active power: 10000 W
Rated apparent power: 10000 VA
Max. apparent power: 10000 VA
AC nominal voltage: 220 V / 380 V, 230 V / 400 V, 240 V / 415 V
AC voltage range: 160 V to 300 V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 16A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 3 / 3-N-PE
Harmonic distortion (THD) at rated output: < 3 %
General data
Dimensions (W / H / D): 503 / 435 / 183 mm
Weight: 16kg
Self-consumption (at night): < 1 W
Topology: Non-isolated
Cooling concept: Active cooling
Degree of protection (according to IEC 60529): IP66
Climatic category (according to IEC 60721-3-4): 4K4H
Max. permissible value for relative humidity (non-condensing): 100%
Max. operating altitude: 3000m
**Vector Approved Inverter**
**10-Year Warranty**
ASW10000-S-A | 10kW | Single Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick and easy to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Built to international quality standards, featuring an integrated DC switch and an IP66-rated design for reliable outdoor performance.
User-friendly
Supports 16 A input current—ideal for bifacial and large-area PV modules—with 3 MPPTs for flexible array design and ShadeSol technology for enhanced performance in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 15000 Wp STC
Max. input voltage: 600V
MPP voltage range / rated input voltage: 80 V - 560 V / 360 V
Min. input voltage: 80 V
Initial. feed in voltage: 100 V
Max. operating input current: 16A
Max. short circuit current: 22.5A
No. of independent MPPT inputs / strings per MPPT input: 3/1
Output (AC)
Rated active power: 10000W
Rated apparent power: 10000VA
Max. apparent power: 10000VA
AC nominal voltage: 220V/230V/240V
AC voltage range: 180V to 295V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 50A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 1
Harmonic distortion (THD) at rated output: < 3%
General data
Dimensions (W / H / D): 503 / 435 / 183 mm
Weight: