Solar Controllers
-
SRNE SRNE HC2410 High Quality 10A PWM Solar Charge Controller 12V/24V
SRNE HC2410 High Quality 10A PWM Solar Charge Controller 12V/24V Features: 32-bit high-speed master control chip. Large LCD screen for adjustable charge and discharge settings. Supports multiple battery types and allows setting the load to operate during day or night. Multi-stage PWM charge management. Built-in protections: reverse connection, open circuit, high temperature, and over-current/short-circuit (optional), all self-recovering with no damage to the controller. Double MOS anti-backflow circuit for ultra-low heat generation. Lithium battery activation. Dual USB outputs (5V, 2A) for fast charging of devices like iPhone, iPad, and Android phones. Specifications: Model: SRNE HC2410 System Voltage: 12V/24V Rated Current: 10A Max PV Input Voltage: 50V Charging Mode: PWM/Intermittent Battery Types Supported: Lead Acid, Lithium USB Output: 5V, 2A No Load Power Consumption: ≤10mA Operating Temperature: -35 - +60°C Altitude: ≤3000m IP Rating: IP32 Product Size: 120x75x34mm Weight: 130g
$32.99
-
EPEVER EPEVER ET-NC G3 Series 50A MPPT Charge Controller ET5420NC G3
The ET-NC G3 series is a new generation of high-current MPPT charge controller. It offers superior MPPT tracking and conversion efficiency. The series is compatible with various lithium battery types and supports three-stage charging management to extend battery lifespan. Its exceptional low-power design significantly reduces static consumption, prolonging system standby time. Comprehensive electronic protection and flexible communication options (WiFi, Bluetooth, 4G, etc.) further enhance system reliability and monitoring capabilities. It is widely used in RVs, boats, industrial monitoring, and small to medium-sized solar power systems. Features Supports 12V/24V/36V/48V systems; Charging current: 50A All metal die-casting shell Supports two PV inputs Max. MPPT tracking efficiency: 99.9%; Max. Conversion efficiency: 98.5% Compatible with AGM, Gel, Flooded, LiFePO4 batteries, etc. Constant voltage output function: Enables direct load supply with sufficient PV energy Communication interface with electrical isolation Real-time data recording, event logging, and power statistics function EMC compliant (CLASS B) Model: ET5420NC G3 Battery Rated Voltage: 12/24/48VDC or Auto Controller Operating Voltage Range: 8–62V Battery Type: AGM (Default) / Gel / Flooded / User Lithium Battery Type: LiFePO4 / Li (NiCoMn)O2 / User Rated Charging/Discharging Current: 50A Rated Charging Power: 650W/12V; 1,300W/24V; 2,600W/48V Maximum Charging Power: 650W/12V; 1,300W/24V; 2,600W/48V PV Maximum Open-circuit Voltage: 200V (@ lowest temperature); 180V (@ 25℃) Tracking Efficiency: ≥ 99.5% Maximum Conversion Efficiency: 98.3% Dimension (Length × Width × Height) Controller & White Terminal Cover: 307 × 253 ×143mm Controller Only: 307 × 202 ×134mm Net Weight: 4.79kg
$419.00
-
EPEVER EPEVER New 30A Dual Battery MPPT Solar Controller DR3210N
EPEVER New 30A Dual Battery MPPT Solar Controller DR3210N 5 years warranty! DuoRacer Series MPPT Dual Battery Solar Charge Controller 20A is designed for charging two batteries at the same time in a solar system. This controller supports multiple life battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and small applications. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the conditions are satisfied. The controller adopts the advanced MPPT control algorithm by Epsolar, which will minimize the maximum power point loss rate and loss time and fast-track the maximum power point(MPP) of the PV array to obtain the maximum energy from the solar array under any conditions. Features: Maximum Power Point Tracking technology with ultra-fast tracking speed and tracking efficiency at no less than 99.5% guaranteed Advanced MPPT control algorithm to minimize the MPPlost rate and lost time A wider range of the MPP operation voltage to improve the PV module utilization Auto control function of charging power & charging current limitation(BATT1) High quality and low failure rate components of ST, TI and Infineon to ensure the product life Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life BATT1 type can be set via LED/LCD The DuoRacer switches into the low-power mode when there is no manual operation for a long time and charging conditions are not satisfied (PV
$255.00
-
EPEVER EPEVER New 20A Dual Battery MPPT Solar Controller DR2210N
DuoRacer Series MPPT Dual Battery Solar Charge Controller 20A is designed for charging two batteries at the same time in a solar system. This controller supports multiple life battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and small applications. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the conditions are satisfied. The controller adopts the advanced MPPT control algorithm by Epsolar, which will minimize the maximum power point loss rate and loss time and fast-track the maximum power point(MPP) of the PV array to obtain the maximum energy from the solar array under any conditions. Features: Maximum Power Point Tracking technology with ultra-fast tracking speed and tracking efficiency at no less than 99.5% guaranteed Advanced MPPT control algorithm to minimize the MPPlost rate and lost time A wider range of the MPP operation voltage to improve the PV module utilization Auto control function of charging power & charging current limitation(BATT1) High quality and low failure rate components of ST, TI and Infineon to ensure the product life Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life BATT1 type can be set via LED/LCD The DuoRacer switches into the low-power mode when there is no manual operation for a long time and charging conditions are not satisfied (PV
$178.99
You have seen 52 out of 52 products