Description
The ZSSP31-19-D110-1300 is a 1300 W, 110 VDC solar surface swimming-pool pump for clean-water circulation and transfer in off-grid locations. Its oil-filled permanent-magnet brushless DC motor is paired with an external MPPT controller for efficient solar operation.
Recommended applications
- Residential and commercial swimming-pool circulation
- Clean river, pond and shallow-well water transfer
- Tank filling and remote-property water supply
- Off-grid irrigation using clean water
Pump specifications
- SKU: PUMP-D110/1300
- Model: ZSSP31-19-D110-1300
- Type: solar surface swimming-pool pump
- Rated power: 1300 W
- Rated voltage: 110 VDC
- Maximum flow: 31 m³/h (31,000 L/h)
- Maximum head: 19 m
- Maximum suction lift: 8 m
- Inlet / outlet size: 60 / 63 mm
- Motor: oil-filled permanent-magnet brushless DC motor, without Hall sensor
- Pump body, inlet/outlet and impeller: reinforced nylon
- Motor body: die-cast aluminium
- Screws: 304 stainless steel
- Pump cable: 3-core, 3 m, 2.0 mm²
Controller specifications
- Controller model: JL-197K1500
- Control technology: 32-bit MCU, FOC, sine-wave current control and MPPT
- Rated voltage: 110 VDC
- Under-voltage protection: 60 VDC
- Over-voltage protection: 205 VDC
- Rated current: 13 A
- Over-current protection: 15 A
- Peak-current protection: 18 A
- Controller enclosure: die-cast aluminium
- Controller dimensions: 197 × 190 × 98 mm
- Controller weight: 2.1 kg
- Cooling: fan-assisted heat dissipation
- Operating temperature: -20°C to +50°C
- Operating mode: S1 continuous duty
Protection and control features
- MPPT operation and motor soft-start
- Dry-well, bound-pump, high-voltage surge and low-input-voltage protection
- Open-motor-circuit, short-circuit and over-temperature protection
- Connections for well-level and tank-level sensors
- Adjustable speed and timer settings
Important installation notes
This is a surface pump and must not be submerged. Use clean water and suitable inlet filtration. Maximum flow and maximum head are separate operating endpoints and are not achieved simultaneously. Solar-panel wiring and operating voltage must be checked against the actual panel ratings and controller limits. Professional installation is recommended.