Description
The CPM6/24-D48/550 is a 48 VDC solar surface pump for clean-water transfer, shallow-water sources and off-grid irrigation. The brushless DC motor works with an MPPT controller to make efficient use of available solar power.
Recommended applications
- Agricultural and garden irrigation
- Clean river or shallow-well water transfer
- Filling storage tanks and header tanks
- Remote residential or farm water supply
Key specifications
- Model: CPM6/24-D48/550
- Type: solar surface pump
- Rated power: 550 W (0.7 HP)
- Rated voltage: 48 VDC (32-100 VDC)
- Rated current: 15 A
- Maximum flow: 6,000 L/h
- Maximum head: 24 m
- Inlet / outlet: 1 inch
- Pump body: cast iron
- Impeller: brass
- Controller: MPPT, FOC and sine-wave current control; IP65 enclosure
- Suggested solar array: two 550 W panels in parallel, each 42 Vmp / 51.7 Voc
- Package size (L × W × H): 39 × 29 × 40 cm
- Gross weight: 16.08 kg
Warranty
18-month supplier warranty. Warranty is subject to correct installation, operation and maintenance. Damage caused by incorrect wiring, dry running, unsuitable PV configuration or failure to follow the manual is excluded.
Important installation notes
This is a surface pump and must not be submerged. Use clean water and install suitable inlet filtration. Maximum flow and maximum head are separate endpoints on the performance curve and are not achieved simultaneously. Install the controller in a shaded, ventilated and weather-protected enclosure. Professional installation is recommended.
