Description
Bring solar storage into your home with the MICROMALL MSLB-48300MLEG, a 51.2V 280Ah LiFePO4 battery with a raised base and four support legs. The elevated design leaves room beneath the battery for cleaning and everyday visual checks, while its compact footprint fits neatly into your indoor battery setup.
Raised off the floor, easier to look after
-
More room for cleaning. Space beneath the base makes it easier to reach the floor around and under the battery.
-
A clear view underneath. The open space beneath the battery makes routine visual checks more convenient.
-
Compact floor-standing design. The battery and base occupy just 790 × 275 mm, with an overall height of 585 mm.
Solar storage with active balancing
The MSLB-48300M battery module provides 14.5kWh of energy and 13.6kWh of usable energy for storing daytime solar generation for later use. Active cell equalisation helps maintain cell balance during operation. CAN2.0 and RS485 support communication with compatible inverters, alongside Bluetooth and Wi-Fi connectivity.
What's included
- 1 × MSLB-48300M LiFePO4 battery
- 1 × raised base with four support legs
Dimensions
790 × 275 × 585 mm (L × W × H), including the base and support legs.
Battery specifications
| Battery module model |
MSLB-48300M |
| Battery chemistry |
LiFePO4 |
| Rated capacity |
280Ah |
| Maximum capacity |
315Ah |
| Nominal voltage |
51.2V |
| Operating voltage |
43.2 - 57.6V |
| Energy |
14.5kWh |
| Usable energy |
13.6kWh |
| Recommended / maximum charge-discharge current |
150A / 200A |
| Peak current / short-circuit current |
200A (500ms, 25°C) / 1.444kA (1.12ms, 25°C) |
| Recommended depth of discharge |
90% |
| Battery module dimensions (L × W × H) |
790 × 275 × 400 mm |
| Battery module weight |
Approximately 110 ±5 kg; excludes base and support legs |
| LED indicators |
5 state-of-charge LEDs (20–100%); 3 status LEDs (working, alarm, protection) |
| Enclosure rating |
IP20 |
| Operating temperature |
Charge:0 - 55°C (Optional heating) / Discharge: -20°C - 55°C |
| Insulation resistance factory test |
>100MΩ |
| Initial battery internal resistance |
0.18±0.05mΩ |
| Storage temperature |
0°C - 35°C |
| Humidity |
5% - 95% |
| Altitude |
<=2000m |
| Cycle life |
≥8,000 cycles (25°C ±2°C, 0.5C/0.5C, 90% DoD, 70% end of life) |
| Installation |
Floor-Mounted, Mobile-Mounted |
| Communication |
CAN2.0, RS485, Bluetooth and Wi-Fi |
| Energy throughput |
65MWh at 70% end of life |
| Certification |
SAA, IEC62619, UN38.3 |
Installation
Designed for a suitable dry indoor location (IP20). Confirm inverter compatibility and have your installer check the cabling, protection and placement. Optional two- or three-module configurations are available for larger storage systems.
Warranty
The battery comes with a 15-year New Zealand local warranty, subject to the applicable warranty terms and energy-throughput limit.