Introducing the EPEVER XTRA4415N-XDS2 40A MPPT Solar Charge Controller, a high-performance device designed for 12/24/36/48V systems, capable of handling up to 150V.
Key Features:
Utilizes advanced MPPT technology with up to 99.5% tracking efficiency.
Achieves DC/DC transfer efficiency up to 98%, with full load efficiency at 97.4%.
Offers a broad MPP operating voltage range.
Features low temperature protection and a lithium battery charging self-activation function.
Includes power and current limitation beyond rated specifications.
Equipped with real-time energy monitoring.
Supports multiple load operation modes.
Provides comprehensive electronic protection for safety.
Compatible with both lead acid and lithium-ion batteries.
Over temperature protection with power reduction in high heat.
Optional LCD display units (XDB1/XDS1/XDS2) for enhanced usability.
Built with high-quality, durable components from ST or IR.
Isolated RS485 with protected 5V/200mA output, using standard Modbus protocol.
Remote monitoring and settings adjustment via APP or PC software.
Dust and waterproof with an IP32 rating.
CE certified (LVD IEC62109, EMC EN3/1-6-61000).
Specifications:
Nominal voltage: Auto 12/24/36/48VDC
Charge/discharge current: 40A
Battery voltage range: 8-68V
Max PV open circuit voltage: 150V
Max PV input power: 520W (12V), 1040W (24V), 1560W (36V), 2080W (48V)
Conversion efficiency: 98.5%; Load efficiency: 97.2%
Dimensions: 255x189x83.2mm; Weight: 2.47kg
Tracer series AN controller adopts MPPT technology (Maximum Power Point Tracking). The advanced tracking algorithm make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increase charge efficiency up to 25% and decrease the power of solar array needed. Tracer has the ability to step-down the higher voltage solar array to recharge a lower voltage battery bank.
come with 5 years warranty.
New A-series Tracer has all the features of earlier Tracer models, and has a built in display. Fully USER definable settings using optional MT-50 ($49) or PC cable ($15) suitable for a wide range of battery types, and load timer, day/night, or disconnect settings - this makes it compatible with most LITHIUM BATTERIES. The MT-50 display is not required for selecting any of the three standard battery settings. 3 Stage charging: Bulk, Boost and Float, plus Equalize function. Settings for Flooded, Gel, Sealed batteries or user defined settings, contain algorithms to suit all lead acid battery types. Temperature Probe $25；eBOX WIFI $35
Suitable for use on 12 and 24 VDC systems
MPPT Technology is around 98% efficient, which is much better than the old PWM type charging that is around 75% efficient
MPPT technology takes the difference in voltage between your batteries and your solar panels and converts it into CHARGING AMPS for up to 45% + more output from your panels!
Can take any Solar Input that is higher than your Battery Voltage and charge your batteries!
Example: You can have a 24VDC solar panel and a 12VDC battery system, and the MPPT controller will turn the extra voltage into Amps!
Peak conversion efficiency of 97 %
High Tracking efficiency of 99%
MODEL: TRACER 3210AN
12VDC / 24VDC Auto
Rated Battery Current 30A
Max. Solar Input Voltage 100VDC
Max. PV input power:12V/ 390W , 24V /780W
Dimension 228x 164 x 55 / mm
Weight 1.2kg
The Tracer-AN Solar Charge Controller boasts high-efficiency multiphase synchronous rectification technology (MSRT) and a sophisticated MPPT control algorithm. Its dual-core processor architecture and common negative design ensure rapid response, reliability, and adherence to high industrial standards.
Key Features:
High Conversion Efficiency: MSRT ensures optimal conversion efficiency at any charge power, enhancing your solar system's energy efficiency.
Advanced MPPT Algorithm: Minimizes power point loss rate and loss time, ensuring rapid tracking of the PV array's maximum power point (MPP) for maximized energy capture.
Stability & Safety: Charging power and current limitation functions, along with automatic power reduction, ensure stable operation with oversized PV modules and in high-temperature environments.
Ultra-fast Tracking: With a tracking efficiency of up to 99.5%, the advanced MPPT technology and rapid tracking speed allow the device to promptly adjust to optimal energy capture settings.
Charging Options: Supports four charging options—Sealed, Gel, Flooded, and User.
Load Control: Load relay control facilitates various load work modes.
Relay Design: Features auto-control for utility and generator relays.
Remote Sensing: Remote temperature and voltage sensors provide accurate battery data.
Communication: Isolated RS-485 interface (with 5VDC/200Ma protected output and MODBUS protocol) allows for device connectivity without power loss.
Monitoring: Easily monitor and adjust parameters via mobile app or PC software.
Specifications:
System Nominal Voltage: 12/24V DC Auto
Rated Charge Current: 10A
Rated Discharge Current: 10A
Max PV Open Circuit Voltage: 60V, 46V
MPPT Voltage Range: (Battery Voltage +2V)~36V
Max PV Input Power: 130W (12V), 260W (24V)
Self-consumption: ≤12mA
Discharge Circuit Voltage Drop: ≤0.23V
Grounding: Common Negative
RS485 Interface: 5V DC/100mA
Dimensions: 172 x 139 x 44 mm
Weight: 570g
EPEVER New 30A Dual Battery MPPT Solar Controller DR3210N
5 years warranty!
DuoRacer Series MPPT Dual Battery Solar Charge Controller 20A is designed for charging two batteries at the same time in a solar system. This controller supports multiple life battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and small applications. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the conditions are satisfied. The controller adopts the advanced MPPT control algorithm by Epsolar, which will minimize the maximum power point loss rate and loss time and fast-track the maximum power point(MPP) of the PV array to obtain the maximum energy from the solar array under any conditions.
Features:
Maximum Power Point Tracking technology with ultra-fast tracking speed and tracking efficiency at no less than 99.5% guaranteed
Advanced MPPT control algorithm to minimize the MPPlost rate and lost time
A wider range of the MPP operation voltage to improve the PV module utilization
Auto control function of charging power & charging current limitation(BATT1)
High quality and low failure rate components of ST, TI and Infineon to ensure the product life
Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life
BATT1 type can be set via LED/LCD
The DuoRacer switches into the low-power mode when there is no manual operation for a long time and charging conditions are not satisfied (PV
DuoRacer Series MPPT Dual Battery Solar Charge Controller 20A is designed for charging two batteries at the same time in a solar system. This controller supports multiple life battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and small applications. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the conditions are satisfied. The controller adopts the advanced MPPT control algorithm by Epsolar, which will minimize the maximum power point loss rate and loss time and fast-track the maximum power point(MPP) of the PV array to obtain the maximum energy from the solar array under any conditions.
Features:
Maximum Power Point Tracking technology with ultra-fast tracking speed and tracking efficiency at no less than 99.5% guaranteed
Advanced MPPT control algorithm to minimize the MPPlost rate and lost time
A wider range of the MPP operation voltage to improve the PV module utilization
Auto control function of charging power & charging current limitation(BATT1)
High quality and low failure rate components of ST, TI and Infineon to ensure the product life
Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life
BATT1 type can be set via LED/LCD
The DuoRacer switches into the low-power mode when there is no manual operation for a long time and charging conditions are not satisfied (PV
Come with 5 years warranty
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
Features:
CE certification(LVD EN/IEC62109, EMC EN61000-6-1/3)
High quality & low failure rate components of ST and Infineon to ensure the product’s life
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
Auto control system to limit the charging power & current go over the rated value
Battery temperature compensation function, Real-time energy recording and statistical function, Automatic over-temperature power reduction function
Load relay control external load switch signal to realize diversified load work modes
All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time.
MODEL: TRACER 6415AN
12VDC / 24VDC /36VDC/48VDC Auto select
Rated Battery Current 60A
Max. Solar Input Voltage 150VDC
Max. PV input power:12V/ 750W , 24V /1500W, 36V/2250W, 48V/3000W
Dimension 340x 236 x 119 / mm
Weight 4.5kg
Come with 2 years warranty
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
Features:
12V/24V/36V/48VDC Auto
High quality & low failure rate components of ST and Infineon to ensure the product’s life
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
Auto control system to limit the charging power & current go over the rated value
Battery temperature compensation function, Real-time energy recording and statistical function, Automatic over-temperature power reduction function
Load relay control external load switch signal to realize diversified load work modes
All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time.
MODEL: TRACER 8415AN
12VDC / 24VDC /36VDC/48VDC Auto select
Rated Battery Current 80A
Max. Solar Input Voltage 150VDC
Max. PV input power:12V/ 1000W , 24V /2000W, 36V/3000W, 48V/4000W
Dimension 394x 240 x 134 / mm
Weight 6.1kg
Comes with 5 year warranty
Tracer-AN Series is the largest charge controller series in EPEVER's product range and can take up to 5KW solar panels. For even more power, the user can use PAL-ADP-5ON to connect max. 6 units of a controller in parallel for up to 30kW system. The multiple dry contact signals are designed for a diversified application.
Features
MPPT tracking efficiency above 99.5%
Maximum charge conversion efficiency as high as 98%
Support lead-acid and lithium-ion batteries
Common negative grounding, Charging current up to 100A
Charging power and current limitation function
High-temperature charging power derating function
3 relays design for different demand: utility, generator and load
Support up to 6 units in parallel
Remote temperature and voltage sensor design
Isolated Rs-485 with 5VDC/200mA and MODBUS protocol
Model: Tracer10420AN
Nominal system voltage: 12/24/36/48VDC/Auto
Battery type: Lead-acid/Lithium/User
Battery input voltage range: 8V - 68V
Rated charge current: 100A
Rated charge power:
1250W/12V
2500W/24V
3750W/36V
5000W/48V
Max. conversion efficiency: 98.50%
Tracking efficiency: >=99.5%
Max. PV open circuit voltage: 200V
MPP voltage range: (Battery Voltage+2V) - 144V
Enclosure: IP20
Communication interface: RS485
Dimensions(LxWxH)(mm): 394x242x143
Net weight: 7.4kg
5 YEARS WARRANTY
Compatible with Lithium Batteries!
UPower series is an inverter/charger with power from 1KVA to 5KVA, which combines MPPT solar charge controller, pure sine wave inverter, and AC/DC charger in one unit. The inverter and AC/DC charger can work simultaneously,
makes UPower perfectly suits residential applications, schools, cottages and the area where the electricity is not stable
or the applications that need uninterruptible power.
Features
A new type of all-digital intelligent energy storage and management Inverter/charger
MPPT technology, Max. tracking efficiency 99.5%, Max. DC-DC conversion efficiency 98.5%
Advanced all-digital control technology for AC-DC charging modules
SPWM technology, with high efficiency up to 95%
With the function of Utility & Solar charging ratio selection, and total charging current setting
Four charging mode and two output mode
Rich set of options
RS485 isolated communication interface with standard Modbus protocol
Extensive electronic protections
Variety of accessories can be selected according to user’s requirements
Specifications
Model: UP5000-M10342
Nominal battery voltage: 48VDC
Battery input voltage range: 43.2～64VDC
Inverter output
Continuous output power: 4000W
Output power 15min: 5000W
Output voltage range: 220V ± 5%; 230V(-10% ～ +5%)
Output frequency: 50/60 ± 0.1Hz
Output wave: Pure Sine Wave
Max.efficiency: 95%
Solar charging
Max. PV open circuit voltage:
200V (At minimum operating environment temperature)
180V (At 25°C environment temperature)
Max. PV input power: 5000W
Max. PV charging current: 100A
Dimensions(HxWxL) : 605x315x178mm
Net weight: 17.8kg
Introducing the brand-new EPEVER XTRA N Series Solar Charge Controller, a state-of-the-art product designed for optimal solar system performance and durability.
The XTRA N Series Controller boasts a digitally controlled self-adaptive three-stage charging mode, extending battery lifespan and enhancing system performance. With comprehensive electronic protection, it safeguards against overcharge, overdischarge, and PV & battery reverse polarity, making your solar system more reliable and durable. This versatile controller is ideal for various applications including RVs, household systems, and field monitoring.
Product Details:
Model: Tracer 4210AN MPPT Charge Controller
12V / 24V DC Auto
Rated Charge Current: 40A
Max Input Power: 12V @ 520W | 24V @ 1040W
Max PV Open Circuit Voltage: 100VDC (92V at 25°C)
Battery Type: Lead-acid (Gel, Sealed, Flooded) and Lithium
Battery Voltage Range: 9V~32V
Common-Negative Ground Controller
Charging Power and Current Limitation Function
User Programmable for Battery Types, Load Control, etc.
Key Features:
CE Certified (LVD EN/IEC62109, EMC EN61000-6-1/3)
Operates efficiently across a wide range of temperatures, with 100% charging and discharging
Optional LCD display units available: XDB1/XDS1/XDS2
Crafted with high-quality, low-failure-rate components from ST or IR to ensure longevity
Advanced MPPT technology with ultra-fast tracking speed, delivering up to 99.5% tracking efficiency
High transfer efficiency of 98.3% DC/DC, and full load efficiency of up to 97.3%
Weight: 2.3kg
Package Includes:
1 x Tracer 4210AN MPPT Charge Controller
Warranty:
Covered by a 12-month warranty for your peace of mind.
Invest in the EPEVER XTRA N Series Controller for a dependable and enduring solar system experience!
Introducing the XTRA N Series Solar Charge Controller:
Brand new epever solar charge controller
Self-adaptive three-stage charging mode for extended battery lifespan and improved system performance
Comprehensive electronic protection against overcharge, overdischarge, PV & battery reverse polarity, ensuring reliability and durability
Suitable for various applications such as RVs, household systems, field monitoring, and more
12 months warranty included
Specifications (Tracer 2210AN MPPT Charge Controller):
Voltage: 12V / 24V DC (Auto)
Max Input Power: 12V @ 260W | 24V @ 520W
Max PV Open Circuit Voltage: 100VDC (92V at 25°C temperature)
Battery Types: Lead-acid (Gel, Sealed, Flooded) and Lithium
Battery Voltage Range: 9V~32V
Common-Negatived Ground Controller
Charging Power and Current Limitation Function
User programmable for battery types, load control, etc.
Key Features:
CE certification (LVD EN/IEC62109, EMC EN61000-6-1/3)
100% charging and discharging in working environment temperature range
Optional LCD display units available (XDB1/XDS1/XDS2)
High-quality components ensure reliability with low failure rate (ST or IR)
Advanced MPPT technology with ultra-fast tracking speed (efficiency up to 99.5%)
Maximum DC/DC transfer efficiency as high as 98.3%, full load efficiency up to 97.3%
Accurate recognition and tracking of multi-peaks maximum power point
Lightweight design (0.96kg) and compact dimensions (21715856.5mm)
Included in the package:
1 x Tracer 2210AN MPPT Charge Controller
Upgrade your solar charging system with the XTRA N Series Solar Charge Controller for enhanced performance and reliability.
Introducing the Epever Solar Charge Controller - XTRA2206N (20A):
Brand new Epever solar charge controller
XTRA N series controller featuring self-adaptive three-stage charging mode for extended battery lifespan and improved system performance
Comprehensive electronic protection for overcharge, overdischarge, PV & battery reverse polarity, ensuring reliability and durability in your solar system
Suitable for various applications including RV, household systems, field monitoring, and more
Comes with a 12-month warranty
Specifications:
Model: XTRA2206N G3
Battery Rated Voltage: 12/24VDC Auto
Rated Charging Current: 20A
Rated Discharging Current: 20A
Controller Work Voltage Range: 8~32V
PV Maximum Open-circuit Voltage:
60V(At minimum operating environment temperature)
46V(At 25℃ environment temperature)
MPPT Voltage Range: (Battery voltage+2V)~36V
Rated Charging Power:
260W/12V
520W/24V
Maximum Conversion Efficiency: 98.30%
Maximum Load Efficiency: 96.70%
RS485 Port: 5VDC/200mA(RJ45)
Dimension (L x W x H): 217×158×56.5mm
Mounting Size (L x W): 160×149mm
Net Weight: 0.97kg
Upgrade your solar system with the Epever XTRA2206N Solar Charge Controller for efficient and reliable power management.
Introducing the Epever MPPT Solar Charge Controller 30A XTRA3210N bundled with the MT50 Remote Meter – a top-tier combination for optimal solar charge management!
Product Features:
Model: XTRA3210N
Voltage: 12/24V
Current: 30A
Maximum PV Voltage: 100V
Max PV Input Power: 390W (12V), 780W (24V)
Key Features:
Modular MPPT solar charge controller for efficient energy management.
Common negative design and automatic module driver recognition for ease of use.
Compatible with both lead-acid and lithium batteries.
Offers multiple load control modes.
Extensive electronic protection to safeguard your equipment.
Features an LCD display and LED indicator for real-time monitoring.
Supports master or slave RS485 communication.
Equipped with a 2.2A USB output.
Original relay design for enhanced reliability.
Electronic Protections:
PV short circuit
PV overcurrent
PV reverse polarity
Battery overvoltage
Battery over-discharge
Battery overheating
Load short circuit
Load overload
Controller overheating
Display Feature:
The integrated display provides vital information, such as panel and battery voltages, current usage, and production rates, allowing you to monitor your system’s performance at a glance.
Warranty:
Enjoy peace of mind with a 12-month warranty included with your purchase!
Enhance your solar energy system with the Epever MPPT Solar Charge Controller XTRA3210N and MT50 Remote Meter combo – designed for performance, reliability, and protection!
This is an updated series of Tracer A/AN Series controller, can be integrated with different display and interface modules to meet a variety of functional requirements. Can automatically identify and load the drivers of various modules.
Negative groud designed of this 30a modual mppt controller can be widely used for different applications, e.g., communication base stations, household systems, street lighting systems and field monitoring, RV solar system etc.
7 battery selection Sealed(AGM), Gel, Flooded, Lead-acid User, LiFePO4 Lithium, Li(NiCoMn)O2 Lithium, Lithium User(9~34V). Dual 5V DC USB output interface of this mppt controller can charge your electronic devices directly.
Real-Time energy statistic function, View/modify working parameters via APP or PC software via RS485 interface.(optional).
Specification
Model: TRIRON3210N
System voltage: 12/24VDC auto work
Rated charge current: 30A
Battery input voltage range:8-32V
Max. PV open circuit voltage:100Vat Min operating environment temp; 92Vat 25 environment temp
MPP voltage range: (Vbat+2V)72V
Max. PV Array Power: 390W/12V; 780W/24V
Working environment temperature:-25℃～+55℃（with LCD）/-30℃～+55℃（without LCD）
Lithium battery: LiFePO4（4S;8S）/Li-NiCoMn（3S; 6S）
Self-consumption: ≤14mA(12V)；≤15mA(24V)
Temp. compensation: -3mV/℃/2V
Grounding: Common Negative
Terminals/Wire Size: 8AWG(10mm²)
Indicators: PV & battery & load working status
Buttons: View or set the parameters
LCD: PV display voltage/current /generated energy/Power Battery display voltage/current/temperature/capacity
USB interface module: Dual USB 5V 2.2A USB output for electronic equipment, NOTE: USB interface is output when the load is ON.
PC software & mobile APP (For Andriod System) can remotely monitor the controller status through this port.
NOTE: PC software & mobile APP need RS485 cable or wifi box to connect your device (optional).
Package Including
1x EPEVER TRIRON3210N Controller
1x Temputer sensor
1x Display DS2 module
1x Interface UCS module
XTRA N series controller which can carry different display units(XDB1/XDS1/XDS2) adopt the advanced MPPT control algorithm, it can minimize the maximum power p0int loss rate and loss time, quickly track the maximum power p0int(MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.
Features：
- CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
- 100% charging and discharging in working environment temperature range
- Optional LCD display units (XDB1/XDS1/XDS2)
- High quality and low failure rate components of ST or IR to ensure service life
- Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5%
- Maximum DC/DC transfer efficiency is as high as 98.3%, full load efficiency is up to 97.3%
- Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
- Accurate recognizing and tracking of multi-peaks maximum power p0oint
- Wide MPP operating voltage range
- Support the lead-acid and lithium batteries, programmable temperature compensation
- Limit charging power & current overrated value
- Real-time energy statistics function
- Power reduction automatically over-temperature value
- Multiple load work modes
- Comprehensive electronic protection
- Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus protocol
- Support monitoring and setting the parameters via APP or PC software
Model: XTRA3210N
Rated charge current: 30A
Rated charge power:
390W/12V
780W/24V
Max.PV Array Power:
580W/12V
1170W/24V
Max.PV open circuit voltage:
92V(25℃)
100V (minimum operating temperature)
5 years Warranty
*** 5 years warranty ***
*** Newest Model ***
Product Feature:
CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
Maximum DC/DC transfer efficiency is as high as 98.7%
Accurate recognition and tracking at the highest point of multiple-peaks MPP
Wider range of MPP operating voltage.
Automated over-current protection.
Supports 4 charging options: Sealed, Gel, Flooded and User.
Battery temperature compensation function
Real-time energy recording and statistical function
Automatic over-temperature power reduction function
Support up to 8 units in parallel to expand system
Load relay control external load switch signal to use diversified load work modes
The first and the second disconnection of load control, contain two relay’s contact.
Auto-control of utility and generator relay design
Utility or generator auto-control relays make it easy to use the hybrid power system
The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
Controller can be monitored or parameters set by using the phone App or PC software.
Specifications:
Nominal System Voltage: 12/24/36/48VDC or Auto
Battery Input Voltage: 8V ~ 68V
Battery Type: Sealed/ GEL / Flooded / User
Rated Charge Current: 50A
Battery Fuse: 80A/ 58V
Rated charge power: 625W/12V, 1250W/24V, 1875W/36V, 2500W/48V
Max.PV open circuit: 150V
Track efficiency: >99.5%
Conversion Efficiency :
DESCRIPTION
Epever’s MT11 remote meter is an accessory which is compatible with the DuoRacer series controller. The running data and working status of the controller can be monitored via the MT11 remote meter. The MT11 can browse the controller’s parameters, set the battery type and temperature unit and clean the generated energy. It is suitable for RV, Camper, Boat, and other small applications.
FEATURES
Automatically identify and display the type, model and relevant parameter data of controllers.
Real-time display the operational data and working status of the connected devices indigital, graphics and textural forms by a large-screen multifunction LCD
Three touch buttons are easy and quick to operate
No need for external power supply. Charge controller supply the power for MT11
It can browse the controller’s parameters, set the battery type and temperature unit, and clean the generated energy
Real-time display of failure information of the connected devices.
Longer communication distance based on RS485
TECHNICAL SPECIFICATIONS
Apply to model: DuoRacer series
Self-consumption(Power on): 13mA/5Vdc
Self-consumption(Power off): 4mA
Communication way: RS485
Communication port: 3.81-4P
RS485 cable:
CC-RS485-RS485-3.81-4P-150(1.5m)
CC-RS485-RS485-3.81-4P-500(5m)
CC-RS485-RS485-3.81-4P-1000(10m)
Dimension: 98.4×98.4mm
Base cover dimension: 114×114mm
Enclosure: IP20
Environment temperature: -20～ +70 degrees Centigrade
Storage temperature range: -20 ～ +70 degrees Centigrade
Weight: 0.11kg
XTRA N series controller which can carry different display units(XDB1/XDS1/XDS2) adopt the advanced MPPT control algorithm, it can minimize the maximum power p0int loss rate and loss time, quickly track the maximum power p0int(MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.
Features：
- CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
- 100% charging and discharging in working environment temperature range
- Optional LCD display units (XDB1/XDS1/XDS2)
- High quality and low failure rate components of ST or IR to ensure service life
- Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5%
- Maximum DC/DC transfer efficiency is as high as 98.3%, full load efficiency is up to 97.3%
- Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
- Accurate recognizing and tracking of multi-peaks maximum power p0oint
- Wide MPP operating voltage range
- Support the lead-acid and lithium batteries, programmable temperature compensation
- Limit charging power & current overrated value
- Real-time energy statistics function
- Power reduction automatically over-temperature value
- Multiple load work modes
- Comprehensive electronic protection
- Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus protocol
- Support monitoring and setting the parameters via APP or PC software
Model: XTRA1210N
Rated charge current: 10A
Rated charge power:
130W/12V
260W/24V
Normal system voltage: 12/24VDC Auto Work
Max. conversion efficiency: ≤98.60%
MPPT tracking efficiency: ≥99.50%
Dimensions(L*W*H)mm: 175*143*48
Gross weight: 0.57KG
5 years Warranty
This model is XDS2 version!
Come with 5 years warranty
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
Features:
CE certification(LVD EN/IEC62109, EMC EN61000-6-1/3)
High quality & low failure rate components of ST and Infineon to ensure the product’s life
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
Auto control system to limit the charging power & current go over the rated value
Battery temperature compensation function, Real-time energy recording and statistical function, Automatic over-temperature power reduction function
Load relay control external load switch signal to realize diversified load work modes
All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time.
MODEL: TRACER 6420AN
12VDC / 24VDC /36VDC/48VDC Auto select
Rated Battery Current 60A
Max. Solar Input Voltage 200VDC
Max. PV input power:12V/ 750W , 24V /1500W, 36V/2250W, 48V/3000W
Dimension 340x 236 x 119 / mm
Weight 4.5kg
EPEVER IPower Plus 12V 2000W Pure Sine Wave Inverter
Overview
IPower Plus series
Pure Sine Wave Inverter
IPower-Plus is a high-frequency pure sine wave inverter which adopts digital intelligent control technology. The inverter brings lower inrush current of input, faster dynamic response, better impact resistance from load, more reliable of operation, also supports lithium batteries. This product fits any situation of DC to AC, such as RVs, boats, residen- tials, and places where require high quality of electrical power.
Features
Pure sine wave output Input to output electrical isolation Digital dual closed-loop control of voltage and current Input surge current suppression for lithium battery systems Output power factor up to 1 Simple system wiring & 180 degrees rotating LCD Input Protection: Reverse polarity, Low-voltage, Over-voltage Output Protection: Overload, Short circuit, Overheating Phone and PC remote control through RS485 port Extra external switch port Safety (EN/IEC62109) & EMC approved by international standards
Model: IP2000-12-PLUS
Continuous output power: 2000W@35°C@ Rated input voltage
Surge power: 4000W@5S
Surge current when power on: 88%
Max. output efficiency: >94%(30% loads)
No-load current:
EPEVER IPower Plus 24V 2000W Pure Sine Wave Inverter
Overview
IPower Plus series
Pure Sine Wave Inverter
IPower-Plus is a high-frequency pure sine wave inverter which adopts digital intelligent control technology. The inverter brings lower inrush current of input, faster dynamic response, better impact resistance from load, more reliable of operation, also supports lithium batteries. This product fits any situation of DC to AC, such as RVs, boats, residen- tials, and places where require high quality of electrical power.
Features
Pure sine wave output Input to output electrical isolation Digital dual closed-loop control of voltage and current Input surge current suppression for lithium battery systems Output power factor up to 1 Simple system wiring & 180 degrees rotating LCD Input Protection: Reverse polarity, Low-voltage, Over-voltage Output Protection: Overload, Short circuit, Overheating Phone and PC remote control through RS485 port Extra external switch port Safety (EN/IEC62109) & EMC approved by international standards
Model: IP2000-22-PLUS
Continuous output power: 2000W@35°C@ Rated input voltage
Surge power: 4000W@5S
Surge current when power on: 91%
Max. output efficiency: >93%(30% loads)
No-load current:
EPEVER IPower Plus 12V 3000W Pure Sine Wave Inverter
Overview
IPower Plus series
Pure Sine Wave Inverter
IPower-Plus is a high-frequency pure sine wave inverter which adopts digital intelligent control technology. The inverter brings lower inrush current of input, faster dynamic response, better impact resistance from load, more reliable of operation, also supports lithium batteries. This product fits any situation of DC to AC, such as RVs, boats, residen- tials, and places where require high quality of electrical power.
Features
Pure sine wave output Input to output electrical isolation Digital dual closed-loop control of voltage and current Input surge current suppression for lithium battery systems Output power factor up to 1 Simple system wiring & 180 degrees rotating LCD Input Protection: Reverse polarity, Low-voltage, Over-voltage Output Protection: Overload, Short circuit, Overheating Phone and PC remote control through RS485 port Extra external switch port Safety (EN/IEC62109) & EMC approved by international standards
Model: IP3000-12-PLUS
Continuous output power: 3000W@35°C @Rated input voltage
Surge power: 6000W@5S
Surge current when power on: 87%
Max. output efficiency: >94%(30% loads)
No-load current:
EPEVER IPower Plus 24V 3000W Pure Sine Wave Inverter
Overview
IPower Plus series
Pure Sine Wave Inverter
IPower-Plus is a high-frequency pure sine wave inverter which adopts digital intelligent control technology. The inverter brings lower inrush current of input, faster dynamic response, better impact resistance from load, more reliable of operation, also supports lithium batteries. This product fits any situation of DC to AC, such as RVs, boats, residen- tials, and places where require high quality of electrical power.
Features
Pure sine wave output Input to output electrical isolation Digital dual closed-loop control of voltage and current Input surge current suppression for lithium battery systems Output power factor up to 1 Simple system wiring & 180 degrees rotating LCD Input Protection: Reverse polarity, Low-voltage, Over-voltage Output Protection: Overload, Short circuit, Overheating Phone and PC remote control through RS485 port Extra external switch port Safety (EN/IEC62109) & EMC approved by international standards
IP3000-22-PLUS
Continuous output power: 3000W@35°C @Rated input voltage
Surge power: 6000W@5S
Surge current when power on: 90%
Max. output efficiency: >94%(30% loads)
No-load current:
IPower-Plus is a high-frequency pure sine wave inverter that can convert 12/24/48VDC to 220/230V AC and power the AC loads. It is designed according to the international standard with higher quality, reliability, and safety. Ranging from 500W to 5000W, Ipower-Plus is compatible with lithium-ion batteries perfectly and suits any situation of DC to AC, such as RVs, boats, residentials, and places where require high-quality electrical power.
Product model: IP3000-42-Plus
Continuous Output Power: 3000W
Surge Power: 6000W @ 5S
Surge Current when Power On: < 65A
Output Voltage: 220VAC (±3%); 230VAC (-7% to +3%)
Output Frequency: 50/60Hz ±0.2%
Output Wave: Pure Sine Wave
Output Distortion THD: THD ≤ 3% (Resistive Load)
Load Power Factor: 0.2-1 (Load VA ≤ Continuous Output Power)
Rated Input Voltage: 48VDC
Input Voltage Range: 43.2~64.0VDC
Rated Output Efficiency: > 92.5%
Max. Output Efficiency: > 94.5% (30% Loads)
No-load Current: < 0.5A
USB Output: Not available
RS485 Communication Port: 5VDC / 200mA
Dimension (LxWxH): 491×231.5×123mm
Mounting Dimension: 465×145mm
Net Weight: 7kg
Operating Temperature Range: -20℃ to +60℃ (Refer to the derating curve)
Relative Humidity: < 95% (Non-condensing)
Enclosure: IP20
