Description
The Deye AI-W5.1-PDU1-B Expansion Version is the power distribution and battery management controller for the modular Deye AI-W5.1-B low-voltage LiFePO4 energy storage system. This product follows the modular expansion-system configuration.
Modular Expansion
- One PDU supports from 1 to 6 AI-W5.1-B battery packs in one cluster.
- The system supports from 1 to 6 clusters, with up to 36 battery packs in total.
- System energy ranges from 5.12kWh with one battery pack to 184.32kWh with 36 battery packs.
- Battery packs and additional cluster hardware are sold separately.
Charge and Discharge Current
- 1 battery pack per PDU: 100A maximum, 150A peak for 10 seconds at 25°C.
- 2 battery packs per PDU: 200A maximum, 270A peak for 10 seconds at 25°C.
- 3 to 6 battery packs per PDU: 250A maximum, 360A peak for 10 seconds at 25°C.
- Maximum current for a single battery system is 250A.
- Recommended PCS cable cross-section is at least 55mm².
Dimensions and Weight
- PDU: 720 × 255 × 238mm; 18kg.
- Base: 720 × 255 × 68mm; 6.5kg.
- PDU plus base combined reference: 720 × 255 × 306mm; 24.5kg, calculated by combining the component figures.
- AI-W5.1-B battery module: 720 × 255 × 300mm; 55kg.
- Shopify shipping weight: 1kg, used for the store's quantity-based shipping calculation.
Controller and Base Specifications
- Communication: CAN 2.0 and RS485.
- Installation: Floor-mounted.
- Enclosure rating: IP65 after the system is correctly stacked.
- PDU display: Five SOC LEDs plus RUN, ALARM and ERROR indicators.
Product Supplied
Model: AI-W5.1-PDU1-B + AI-W5.1-Base-B, Expansion Version
Included: PDU battery control box and battery base.
Not included: AI-W5.1-B battery modules, inverter, busbar or combiner equipment.
The final system capacity, current and usable energy depend on the number of installed battery packs, system configuration, temperature and state of charge. Installation must follow the product manual and applicable electrical requirements.