PROJOY PESP-1500 1500V DC Surge Protector for PV
***SAA NZ Certificated***
Projoy PESP series is a special surge protector for the DC side of photovoltaic system. It is widely used in photovoltaic power generation systems, such as various junction box, inverters, DC cabinets, DC pannels and other important and vulnerable DC equipment, to protect the equipment from the impact of transient surge voltage,limiting transient overvoltage and discharging surge current caused by lightning or switching operation.
Imported chips with reliable quality
Nanoscale response
Plug-in structure
Status indicator
Standard installation of 35mm rail
TECHNICAL PARAMETER
SPD Type: T2
Maximum continuous working voltage Ucpv: DC 1500V/DC
Maximum discharge current Imax: 40kA
Nominal discharge current In: 20kA
Poles: 3P
Degree of Protection: IP20
PROJOY PESP-1000 1000V DC Surge Protector for PV
***SAA NZ Certificated***
Projoy PESP series is a special surge protector for the DC side of photovoltaic system. It is widely used in photovoltaic power generation systems, such as various junction box, inverters, DC cabinets, DC pannels and other important and vulnerable DC equipment, to protect the equipment from the impact of transient surge voltage,limiting transient overvoltage and discharging surge current caused by lightning or switching operation.
Imported chips with reliable quality
Nanoscale response
Plug-in structure
Status indicator
Standard installation of 35mm rail
TECHNICAL PARAMETER
SPD Type: T2
Maximum continuous working voltage Ucpv: DC 1000V/DC
Maximum discharge current Imax: 40kA
Nominal discharge current In: 20kA
Poles: 3P
Degree of Protection: IP20
SOLAR PANEL DRILL FREE ABS CORNER SET, RAIL BRACKET, PASS THROUGH SUPPORT KIT
Drill Free Mount Kit made of UV-resistant ABS plastic, and is virtually compatible with any aluminum-framed solar panel with a rectangular shape. They not only offer a simple, stylish and cost-effective solution for providing solar panel with a safe and secure placement on, RVs, travel trailers, caravans, boats motor vehicles and roofs, but also support solar panel at its optimal height to allow bottom aeration, thus ensure the solar panel to function at its maximum efficiency. Solar panel can be easily and conveniently mounted on these bracket with glue, no drilling required. Installation goes fast and easy.
Kits can be configure to your liking.
Corner Mount
Corner Mount with Rails
Corner Mount, Rails with Pass Through
Pass Through
Material: UV-resistant ABS
Corner Brackets:
Size: 6 x 6 x 2 1/2 inches ( L X W X H)
Rail Brackets:
Size: 7 x 3 1/2 x 2 1/2 inches ( L X W X H)
Pass Through:
Size: 4 x 3 1/2 x 2 ( L X W x H )
4 x Corner Mounts
1 x IP67 waterproof cable entry housing
- Material: Plastic
- Colour: White and black, random for delivery if no notice
- Size: 1 Bracket 15 x 15 x 6.5cm
- Weight: 7 Pieces 1.74kg
**Lithium Battery Lables included**
Ensure your solar installation meets safety and regulatory standards with our Solar Label Kit - Value Pack.
This comprehensive kit includes all essential labels for solar systems, including durable Lithium Battery Labels for identifying your battery components.
Designed for long-lasting use, these high-quality labels provide clear identification, ensuring compliance and safety across your solar setup.
Whether you're a professional installer or a DIY enthusiast, this kit is a must-have for any solar project.
NZ Certified Aluminium Alloy Solar Panel Mounting Bracket Set for Tile Roofs - 250x80x40mm, includes L-shaped bracket and hanger bolt for rail attachment. Meets AS/NZS1170 standards.
Material: Aluminium Alloy
Weight: 280g
Includes: 1x Mounting Set
Color: Silver
Size: 250 x 80 x 40mm (LxWxH)
SDM630-Modbus V2 DIN Rail Smart Meter for Three-Phase Electrical Systems
The SDM630 Series is a three-phase multifunction 100A direct fed DIN rail mounted electricity meter. It can measure and display the characteristic of 1p2w ,3p3w and 3p4w supplies, With a user friendly menu navaigation and highly visible LCD display, it The SDM630 requires Mains Voltage inputs (live in and live out, neutral in and neutral out) in order to operate, it is self-supplied so does not require an external auxiliary supply. We have a range of options from a pulsed output version for cost savings and Modbus RTU combined with dual pulsed outputs or MBUS also combined with dual pulsed outputs. Finally, we also have an option for multi-tariff.
SDM630-Modbus V2
RS485 Modbus 100A Din Rail Three Phase MID Energy Meter
Max. 100A Direct Load
Work with 3P4W/3P3W/1P2W
4 Module 72mm wide
Multi-measurement:
kWh,kVarh,W,Var,VA,PF,Hz,dmd,V,etc.
Bi-directional measurement
2 Pulse outputs
RS485 Modbus
Introducing our Universal Adjustable Solar Panel Tilt Mount Brackets, designed to be used on any flat surface. These brackets are perfect for positioning solar panels at the ideal angle on rooftops, ensuring maximum performance. The tilt angle can be adjusted from 30 to 60 degrees, depending on the panel size.
Crafted from high-quality aluminium alloy and stainless steel, these lightweight brackets provide easy and safe mounting for solar panels. They are designed for convenient transportation and offer excellent durability.
Specifications:
- Material: High-Quality Aluminum Alloy & Stainless Steel
- Tilt Angle: 30 - 60 degrees
- Color: Black
The black surface has undergone anodized treatment.
Package Includes:
1 x Adjustable Solar Panel Tilt Mount Bracket Set
Introducing our Universal Adjustable Solar Panel Tilt Mount Brackets, designed to be used on any flat surface. These brackets are perfect for positioning solar panels at the ideal angle on rooftops, ensuring maximum performance. The tilt angle can be adjusted from 10 to 15 degrees, depending on the panel size.
Crafted from high-quality aluminium alloy and stainless steel, these lightweight brackets provide easy and safe mounting for solar panels. They are designed for convenient transportation and offer excellent durability.
Specifications:
- Material: High-Quality Aluminum Alloy & Stainless Steel
- Tilt Angle: 10 - 15 degrees
- Color: Black
The black surface has undergone anodized treatment.
Package Includes:
1 x Adjustable Solar Panel Tilt Mount Bracket Set
Ensure your solar installation meets safety and regulatory standards with our Solar PV Label Kit.
This comprehensive kit includes all essential labels for solar PV systems.
Designed for long-lasting use, these high-quality labels provide clear identification, ensuring compliance and safety across your solar setup.
Whether you're a professional installer or a DIY enthusiast, this kit is a must-have for any solar project.
PROJOY DC FUSE PEDF-1000 1000V DC 30A
***SAA NZ Certificated***
Projoy PEDF series DC Fuse is suitable for short-circuit overload protection in distribution lines with rated voltage not exceeding DC1500V, rated current not exceeding 50A, and rated short-circuit capacity not exceeding 20kA. Mainly used in energy storage systems, solar photovoltaic combiner boxes.
Good sealing
High flame retardant performance
Made of sterling silver core
Strong breaking ability
Replaceable fuse
Indicator base is optional
Technical data
Model: PEDF-1000
Pole: 1P
Standard: IEC60269-1/IEC60269-6
Rated working voltage Ue VDC: 1000V DC
Rated current In A: 30A
Breaking capacity kA: 20kA
Protection degree: IP20
Wire mm2: 1-25mm2
Ambient temperature: -40°C ～ 90°C
Elevation: ≤2000m
Relative humidity: +20°C，≤90%；+30°C，≤80%；+40°C，≤70%
Installation environment: Avoid obvious shock and vibration
Installation class: III
Mounting channel: TH35-7.5/DIN35 rail
PROJOY DC Miniature Circuit Breaker PEBS-L-125 Series
***SAA NZ Certificated***
HIGH CRAFTSMANSHIP AND HIGH STANDARDS
Small Volume
Short circuit Protection
Overload Protection
Flame Retardant
High Breaking Capability
Arcing Short
Complete Accessories
Multiple Wiring
Technical data
According to EN60947-2, AS/NZS IEC 60947.2
Pole: 2P
Rated Working Voltage Ue: 160 V DC
Frame Current: 63A
Rated Current In: 25A
Rated Insulation Voltage Ui: 500V
Rated Impulse Withstand Voltage Uimp: 6kV
Tripping Characteristics: B/C
Tripping Type: Thermal Magnetic
Rated Ultimate Short-Circuit Breaking Capacity Icu: 10kA
Rated Service Short-Circuit Interrupting Capacity Ics: 7.5kA
Dimension: W 36mm x H 73mm
Weight: 0.24kg
PROJOY DC Miniature Circuit Breaker PEBS-L-125 Series
***SAA NZ Certificated***
HIGH CRAFTSMANSHIP AND HIGH STANDARDS
Small Volume
Short circuit Protection
Overload Protection
Flame Retardant
High Breaking Capability
Arcing Short
Complete Accessories
Multiple Wiring
Technical data
According to EN60947-2, AS/NZS IEC 60947.2
Pole: 1P
Rated Working Voltage Ue: 80 V DC
Frame Current: 125A
Rated Current In: 125A
Rated Insulation Voltage Ui: 500V
Rated Impulse Withstand Voltage Uimp: 6kV
Tripping Characteristics: B/C
Tripping Type: Thermal Magnetic
Rated Ultimate Short-Circuit Breaking Capacity Icu: 10kA
Rated Service Short-Circuit Interrupting Capacity Ics: 7.5kA
Dimension: W 27mm x H 76.5mm
Weight: 0.17kg
PROJOY DC Miniature Circuit Breaker PEBS-H-63 Series
***SAA NZ Certificated***
HIGH CRAFTSMANSHIP AND HIGH STANDARDS
Small Volume
Short circuit Protection
Overload Protection
Flame Retardant
High Breaking Capability
Arcing Short
Complete Accessories
Multiple Wiring
Technical data
According to EN60947-2, AS/NZS IEC 60947.2
Pole: 3P
Rated Working Voltage Ue: 750 V DC
Frame Current: 63A
Rated Current In: 25A
Rated Insulation Voltage Ui: 1000V
Rated Impulse Withstand Voltage Uimp: 6kV
Tripping Characteristics: B/C
Tripping Type: Thermal Magnetic
Rated Ultimate Short-Circuit Breaking Capacity Icu: 6kA
Rated Service Short-Circuit Interrupting Capacity Ics: 6kA
Dimension: W 54mm x H 87.5mm
Weight: 0.36kg
PROJOY DC Miniature Circuit Breaker PEBS-H-63 Series
***SAA NZ Certificated***
HIGH CRAFTSMANSHIP AND HIGH STANDARDS
Small Volume
Short circuit Protection
Overload Protection
Flame Retardant
High Breaking Capability
Arcing Short
Complete Accessories
Multiple Wiring
Technical data
According to EN60947-2, AS/NZS IEC 60947.2
Pole: 1P
Rated Working Voltage Ue: 250 V DC
Frame Current: 63A
Rated Current In: 25A
Rated Insulation Voltage Ui: 1000V
Rated Impulse Withstand Voltage Uimp: 6kV
Tripping Characteristics: B/C
Tripping Type: Thermal Magnetic
Rated Ultimate Short-Circuit Breaking Capacity Icu: 6kA
Rated Service Short-Circuit Interrupting Capacity Ics: 6kA
Dimension: W 18mm x H 87.5mm
Weight: 0.12kg
PROJOY DC Miniature Circuit Breaker PEBS-H-63 Series
***SAA NZ Certificated***
HIGH CRAFTSMANSHIP AND HIGH STANDARDS
Small Volume
Short circuit Protection
Overload Protection
Flame Retardant
High Breaking Capability
Arcing Short
Complete Accessories
Multiple Wiring
Technical data
According to EN60947-2, AS/NZS IEC 60947.2
Pole: 3P
Rated Working Voltage Ue: 750 V DC
Frame Current: 63A
Rated Current In: 16A
Rated Insulation Voltage Ui: 1000V
Rated Impulse Withstand Voltage Uimp: 6kV
Tripping Characteristics: B/C
Tripping Type: Thermal Magnetic
Rated Ultimate Short-Circuit Breaking Capacity Icu: 6kA
Rated Service Short-Circuit Interrupting Capacity Ics: 6kA
Dimension: W 54mm x H 87.5mm
Weight: 0.36kg
Drill-Free Solar Panel Mounting Kit: ABS Corner Set with Rail Bracket and Pass-Through Support
This Drill-Free Mount Kit, made from UV-resistant ABS plastic, fits most aluminum-framed solar panels with a rectangular shape. It's an ideal, cost-effective solution for securing solar panels on RVs, travel trailers, caravans, boats, motor vehicles, and roofs. The design ensures optimal panel height for air circulation, maximizing solar panel efficiency. Easy installation with glue, no drilling needed.
Customizable Kits:
Corner Mount
Corner Mount with Rails
Corner Mount, Rails with Pass Through
Pass Through
Material and Dimensions:
Material: UV-resistant ABS
Corner Brackets: 6 x 6 x 2.5 inches (L x W x H)
Rail Brackets: 7 x 3.5 x 2.5 inches (L x W x H)
Pass Through: 4 x 3.5 x 2 inches (L x W x H)
Package Includes:
4 x Corner Mounts
2 x Side Mounts
1 x IP67 Waterproof Cable Entry Housing
Additional Information:
Material: Plastic
Colors: White and Black (random delivery unless specified)
Size per Bracket: 15 x 15 x 6.5 cm
Total Weight: 1.74 kg for 7 pieces
KG110F DC 0-120V 400A Battery Capacity Tester Voltage Current Meter Battery Monitor Indicator 12V 24V 36V 48V 60V Coulomb Meter
We are a technically oriented solar service company that provides quality products, extensive service and support to our customers.
With years of accumulated expertise and rich experience, we will create professional and efficient system design solutions for you according to your different needs.
Specification：
Model： KG140F
Shunt voltage measurement range (externally powered) 0-120V
Voltage measurement range (self-powered) 10-120V
Voltage fraction 0.01V
Current measurement range 0-400A
Current fraction 0.01A
Temperature measurement range -20-120° C
Capacity display range 0%-100%
Power measurement range 0-72KW
Power fraction 0.01W
Ampere-time measurement range 0-9999.99AH
Capacity fraction 0.001AH
Watt-hour measurement range 0-9999.99kWH
Watt-hour fraction 0.001WH
Time measurement range 0~999:59:59S
Time division rate 1 second
Bluetooth communication distance Accessible up to 10m
Voltage Accuracy ±2%+3 words
Current accuracy 5%+10 words
Sampling rate 1 time/second
Power consumption of measurement board approx. 0.4W
Power consumption of display head approx. 0.5W
Over power protection 0-99999.99W
Negative overcurrent protection 0-400A
Positive overcurrent protection 0-400A
External over-temperature protection 0-120° C
Protection recovery time 0-99s
Enter standby time 0-60
Delay time setting 0-99S
Local warehouse, feel free to visit us, we can also ship orders all over the country.
PROJOY DC FUSE 1000V DC 30A
***SAA NZ Certificated***
Projoy PEDF series DC Fuse is suitable for short-circuit overload protection in distribution lines with rated voltage not exceeding DC1500V, rated current not exceeding 50A, and rated short-circuit capacity not exceeding 20kA. Mainly used in energy storage systems, solar photovoltaic combiner boxes.
Good sealing
High flame retardant performance
Made of sterling silver core
Strong breaking ability
Replaceable fuse
Indicator base is optional
TECHNICAL PARAMETER
Rated working voltage Ue: DC 1000V
Rated working current In: 30A
Breaking capacity: 20kA
Degree of Protection: IP20
PROJOY DC FUSE 1000V DC 25A
***SAA NZ Certificated***
Projoy PEDF series DC Fuse is suitable for short-circuit overload protection in distribution lines with rated voltage not exceeding DC1500V, rated current not exceeding 50A, and rated short-circuit capacity not exceeding 20kA. Mainly used in energy storage systems, solar photovoltaic combiner boxes.
Good sealing
High flame retardant performance
Made of sterling silver core
Strong breaking ability
Replaceable fuse
Indicator base is optional
TECHNICAL PARAMETER
Rated working voltage Ue: DC 1000V
Rated working current In: 25A
Breaking capacity: 20kA
Degree of Protection: IP20
PROJOY DC FUSE 1000V DC 20A
***SAA NZ Certificated***
Projoy PEDF series DC Fuse is suitable for short-circuit overload protection in distribution lines with rated voltage not exceeding DC1500V, rated current not exceeding 50A, and rated short-circuit capacity not exceeding 20kA. Mainly used in energy storage systems, solar photovoltaic combiner boxes.
Good sealing
High flame retardant performance
Made of sterling silver core
Strong breaking ability
Replaceable fuse
Indicator base is optional
TECHNICAL PARAMETER
Rated working voltage Ue: DC 1000V
Rated working current In: 20A
Breaking capacity: 20kA
Degree of Protection: IP20
PROJOY DC FUSE 1000V DC 10A
***SAA NZ Certificated***
Projoy PEDF series DC Fuse is suitable for short-circuit overload protection in distribution lines with rated voltage not exceeding DC1500V, rated current not exceeding 50A, and rated short-circuit capacity not exceeding 20kA. Mainly used in energy storage systems, solar photovoltaic combiner boxes.
Good sealing
High flame retardant performance
Made of sterling silver core
Strong breaking ability
Replaceable fuse
Indicator base is optional
TECHNICAL PARAMETER
Rated working voltage Ue: DC 1000V
Rated working current In: 10A
Breaking capacity: 20kA
Degree of Protection: IP20
Introducing the New High-End LED Dimmer, Specially Designed for the AU/NZ Market.
This LED dimmer supports both 1 and 2-way switch connections. Its elegant design and high precision capacitance control chip offer easy installation, simplicity in use, and compatibility with a wide range of LED lights. Ideal for LED lighting, ceiling lights, downlights, panel lights, tubes, bulb lights, and TRIAC dimming lamps (must have a dimmable label).
Features:
High-grade, wear-resistant plastic construction, environmentally friendly and safe.
Clear, convenient brightness adjustment with marked switch panel.
Large, easy-grip rotary knob for comfortable use and free rotation.
Simple installation, exceptional quality, fine workmanship, and stylish design, making it perfect for home, office, or hotel use.
Specifications:
Condition: Brand New
2-Way Switch Connection
Material: Plastic
Color: White
Input Voltage: 240V
Power Frequency: 50Hz-60Hz
Maximum Load Power: 200W
Rotary Angle: 320 degrees
Relative Humidity: 85%
Operating Temperature: -10℃ to 50℃
Life Span: >80,000 cycles
Certifications: CE, RoHS, SAA, SDOC
Package Weight: Approx. 75g
Package Includes:
1 x Rotary Dimmer Switch
ATEM POWER 12V 25A DC to DC Battery Charger with Solar MPPT Controller
This ATEM POWER charger is compatible with various battery types including lithium, lead acid, AGM, gel, calcium, and LiON. It's designed for multiple protection and efficient charging, ideal for a range of vehicles and boats.
Specifications:
Model: AP25DC
Manufacturer: ATEM POWER
Dimensions: 189x148x48mm
Weight: 1.1KG
Max Battery Input Voltage: 24V
Min Solar Input Voltage: 13V
Max Solar Input Current: 25A
Max Solar Input Voltage: 26V
Max Output Current: 25A
DC Input Voltage: 12V (ACC ON), 11.3V (ACC OFF), Max 24V
Rated Charging Current: 25A Max (IN/OUT)
Charging Voltage Range: 7-15.4V
Idle Power Consumption:
Introducing the Newest Smart Hybrid DC to DC 3-in-1 Charger – An All-in-One, High-Efficiency Charging Solution with Two Years Warranty.
Designed for simplicity and efficiency, this smart hybrid charger supports charging from solar panels, mains electricity (AC230V), and DC14.4V, featuring in-built protection within the main board. It prioritizes AC230V charging, followed by solar panels, then DC14.4V, integrating MPPT technology for solar charging efficiency up to 95% or above. The unit combines a 30A MPPT Solar Charger, 10A AC230V Charger, and a DC14.4V 30A Charger into one compact system.
Key Features:
Dimension:42*18*8cm
Three charging modes: Solar, AC, and DC with built-in MPPT technology.
Multiple AC and DC output ports for direct device and appliance powering.
Efficient power management for safe battery charging.
Compatible with various battery types: Lead acid, Gel, Calcium, and AGM.
Features include selectable AC input volt range, programmable parameters, up to 60A utility charging, adjustable bulk & float charging voltage, and support for grid or generator input.
Additional functionalities include a genset starter dry contact, overload and short circuit protection, lightweight design for easy installation, and free monitoring software.
Equipped with an LCD Display and LED indicators for easy monitoring.
Package Includes:
1 x Smart Hybrid 3-in-1 Charger
1 x AC Leads
Ensure your batteries are always in top condition with this versatile, top-of-the-line hybrid charger, backed by a two-year warranty.
