UPower-Hi series is an inverter charger that supports diversified energy management modes on solar/utility/generator charging, and utility/inverter power supply to the AC loads. To maximize solar energy utilization, users can
choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger
can raise the system's power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid
systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy.
Supports the battery mode or non-battery mode
Surge current and reverse connection protections to support the lithium battery system perfectly
Three charging modes: Solar only, Solar priority, Utility & Solar
Two AC output modes: Utility priority and Inverter priority
High tracking efficiency of MPPT no less than 99.5%
PFC technology which achieves a high power factor of AC to DC charging and reduces the usage of power
grid capacity
Advanced SPWM technology and pure sine wave output
Configurable battery charging current and discharging current
Configurable grid charging current
Self-learning SOC function
4.2 inch LCD to monitor and modify system parameters
Optional WiFi or GPRS Remote control via the RS485 isolated communication port
BMS-Link port and optional BMS-Link communication protocol module
Specifications
Model: UP5000-HM8042
Rated battery voltage: 48VDC
Battery input voltage: 43.2 ~ 64VDC
Max. battery charging current: 80A
Inverter output
Continuous output power: 5000W
Max. surge pow er(3S): 8000W
Output voltage range: 220VAC
Output wave: Pure Sine Wave
Solar charging
Max. PV input power: 4000W
Max. PV charging power: 4000W
Max. PV charging current: 80A
Surge current: 95A
Dimension(H x W x D): 642.5x381.6x149mm
Net Weight: 19kg
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**4th Generation AU Version Inverter**
**10-Year Warranty**
SUN-3.6K-SG04LP1-AU | 3.6kW | Single Phase | 2 MPPT | Hybrid Inverter | LV Battery Supported
Higher yields / Safe & Reliable / Smart / User-friendly
Colorful touch LCD, IP65 protection degree
AC couple to retrofifit existing solar system
Max. 16 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel
Max. charging/discharging current of 90A
6 time periods for battery charging/discharging
Support storing energy from diesel generator
Model: SUN-3.6K-SG04LP1-AU
Battery Input Data
Battery Type: Lead-acid or Lithium-ion
Battery Voltage Range (V): 40-60
Max. Charging Current (A): 90
Max. Discharging Current (A): 90
Charging Strategy for Li-Ion Battery: Self-adaption to BMS
Number of Battery Input: 1
PV String Input Data
Max. DC Input Power (W): 5400
Rated PV Input Voltage (V): 500
Start-up Voltage (V): 125
MPPT Voltage Range (V): 150-425
Rated DC Input Voltage(V): 370
Max. Operating PV Input Current (A): 13+13
Max. Input Short-Circuit Current (A): 17+17
No. of MPP Trackers/No. of Strings MPP Tracker: 2/1+1
AC Output Data
Rated AC Output Active Power (W): 3600
Max AC Output Active Power (W): 3600
AC Output Rated Current (A): 15.7
Max. AC Output Current (A): 15.7
Max. Continuous AC Passthrough (A): 35
Peak Power (off grid): 2 time of rated power, 10 S
Efficiency
Max. Efficiency: 97.60%
Euro Efficiency: 96.50%
MPPT Efficiency: 99.90%
General Data
Weight (kg): 17
Cabinet size (mm): 330W x 433H x229D(Excluding connectors and brackets)
Protection Degree: IP65
Install info professional service support! Communication with battery service support!
*** 2 Years Warranty ***
*** Wi-Fi ***
The Growatt SPF 5000 ES is an off-grid inverter. It is suitable for a maximum circuit voltage of 450VDC. The inverter can be used with batteries, but can also work without. The integrated solar charger optimizes the charging and discharging of the battery. Priorities can be assigned, where for example charging from the grid can be preferred overcharging from the PV installation. Monitoring will be possible when adding a separate Wi-Fi or GPRS dongle.
Technical Data
Model: Growatt SPF 5000 ES
Battery Voltage: 48VDC
Battery Type: Lithium/Lead-acid/AGM/GEL
Rated Power: 5000VA/5000W
Parallel Capability: Yes, 6 units maximum
Waveform: Pure sine wave
Maximum PV Array Power: 6000W
MPPT Range @ Operating Voltage: 120VDC ~ 430VDC
Maximum PV Array Open Circuit Voltage: 450VDC
Maximum Solar Charge Current: 100A
AC Charge Current: 80A
Dimensions: 330x485x135mm
Weight: 12kg
PV1900 EXP is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1900 EXP Series can run without battery. The Maximum PV array open circuit voltage can reach 500V and MPPT voltage is 150 - 450Vdc, which Can help customers make full use of solar energy.
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 500V (450V for parallel)
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Dual outputs for smart load management(optional)
Can communicate with lithium batteries
MODEL: PV19-6048 EXP
Nominal Battery System Voltage: 48VDC
INVERTER OUTPUT
Rated Power: 6000VA / 6000W
Surge Power: 12000W
Waveform: Pure sine wave
AC Voltage Regulation (Batt.Mode): 230VAC+-5%(Setting)
Inverter Efficiency(Peak): 92%
Transfer Time: 10ms (UPS / VDE4105) / 20ms (APL)
AC INPUT
Voltage: 230VAC
Selectable Voltage Range: 170 - 280VAC(UPS) / 90 - 280VAC(APL) / 184 - 253VAC(VED4105)
Frequency Range: 50Hz / 60Hz(Auto sensing)
BATTERY
Normal voltage: 48VDC
Floating Charge Voltage: 54.8VDC
Overcharge Protection: 60VDC
SOLAR CHARGER & AC CHARGER
Maximum PV Array Open Circuit Voltage: 500VDC (450V for parallel)
Charging Algorithm: 3-Step (Flooded Battery, AGM / GEL / LEAD Battery), 4-Step (Li)
Maximum PV Array Power: 6000W
Maximum Solar Charge Current: 120A
Maximum AC Charge Current: 100A
Maximum Charge Current: 120A
Dimensions (WxHxD): 309 x 505 x 147mm
2 Years Warranty
The SRNE HF4850S80-H is a high-efficiency solar charge inverter designed for off-grid and backup power systems. It combines pure sine wave AC output, MPPT solar charging, and battery management in one compact unit. With smart monitoring, multiple battery support, and hybrid charging, it ensures reliable and stable power for homes, businesses, and RVs.
Key Features
Reliable Power Output
5,000W rated power, 10,000VA peak power
Supports motor loads up to 4HP
High-Efficiency Solar Charging
5,200W max. PV input, 99.9% MPPT efficiency
Flexible Battery Compatibility
Works with Li-ion, Lead-Acid, and custom batteries
Hybrid Power Support
Supports mains and generator input (90-280V AC)
10ms switching time for uninterrupted power
Safe & Durable
2-year warranty
Specifications
Inverter Output
Rated Power: 5,000W
Peak Power: 10,000VA
Output Voltage: 230V AC (L/N/PE)
Waveform: Pure Sine Wave
Motor Load Capacity: 4HP
Frequency: 50Hz/60Hz
Switching Time: 10ms
Battery
Type: Li-ion / Lead-Acid / User-Defined
Voltage: 48VDC
Voltage Range: 40-60VDC
Max. Charging Current: 80A
PV Input
MPPT Trackers: 1
Max. PV Power: 5,200W
Max. PV Open Circuit Voltage: 500VDC
MPPT Voltage Range: 120-450VDC
Mains/Generator Input
AC Input Voltage: 90-280V AC
Frequency: 50Hz/60Hz
Bypass Overload Current: 40A
Efficiency
MPPT Efficiency: 99.9%
Battery Inverter Efficiency: 92%
General
Size: 426×322×126mm
Weight: 10.9kg
Protection: IP20 (Indoor Use)
Operating Temperature: -15°C to 55°C
Cooling: Internal Fan
Noise Level:
Introducing the MUSTPOWER High Frequency 5000W Off-Grid Solar Inverter PV18-5048 VHM with a 2-year warranty.
Key Features:
Pure sine wave solar inverter
Output power factor 1
High PV input voltage range
Built-in 80A MPPT solar charger
Battery equalization function to optimize battery performance and extend lifecycle
Built-in anti-dusk kit for harsh environments
Model: PV18-5048 VHM
Nominal Battery System Voltage: 48VDC
Inverter Output:
Rated Power: 5000W
Surge Power: 10000W
Waveform: Pure sine wave
AC Voltage Regulation (Batt.Mode): ±5% (220VAC ~ 240VAC)
Inverter Efficiency (Peak): 93%
Transfer Time: 10ms (For Personal Computers), 20ms (For Home Appliances)
AC Input:
Voltage: 230VAC
Selectable Voltage Range: 170280VAC (For Personal Computers), 90280VAC (For Home Appliances), 184~253VAC (VDE4105)
Frequency Range: 50Hz/60Hz (Auto-sensing)
Battery:
Normal Voltage: 48VDC
Floating Charge Voltage: 54VDC
Overcharge Protection: 60VDC
Solar Charger & AC Charger:
Maximum PV Array Open Circuit Voltage: 145VDC
PV Array MPPT Voltage: 64~130VDC
PV Input Power: 2880W/3840W
Maximum Solar Charge Current: 60/80A
Maximum Efficiency: 98%
Maximum AC Charge Current: 60A
Maximum Charge Current: 120/140A
Physical Specifications:
Dimensions (WHD)(mm): 297.5x468x125
Net Weight(kg): 13.3
The MUSTPOWER PV18-5048 VHM is a versatile and reliable solution for off-grid power needs, combining inverter, solar charger, and battery charger functions in a portable package. With its comprehensive LCD display and user-configurable settings, it ensures uninterrupted power support for various applications.
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Features:
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
MODEL: PV18-5248 PRO
Nominal Battery System Voltage: 48VDC
INVERTER OUTPUT
Rated Power: 5200VA / 5200W
Surge Power: 10400W
Waveform: Pure sine wave
AC Voltage Regulation (Batt.Mode): 230VAC±5%(Setting)
Inverter Efficiency(Peak): 90%
Transfer Time: 10ms (UPS / VDE4105) / 20ms (APL)
AC INPUT
Voltage: 230VAC±5%
Selectable Voltage Range: 170~280VAC(UPS) / 90~280VAC(APL) / 184~253VAC(VED4105)
Frequency Range: 50Hz / 60Hz(Auto sensing)
BATTERY
Normal voltage: 48VDC
Floating Charge Voltage: 54.8VDC
Overcharge Protection: 60VDC
SOLAR CHARGER & AC CHARGER
Maximum PV Array Open Circuit Voltage: 450VDC
Charging Algorithm: 3-Step (Flooded Battery, AGM / GEL / LEAD Battery), 4-Step (Li)
Maximum PV Array Power: 5000W/6000W
PV Array MPPT Voltage Range: 150~430 VDC
Maximum Solar Charge Current: 80A/100A
Maximum AC Charge Current: 60A/80A
Maximum Charge Current: 80A/100A
MECHANICAL SPECIFICATIONS
Machine Dimensions: 309 x 505 x 147mm
Package Dimensions: 375 x 655 x 269mm
Net Weight: 14kg
Gross Weight: 16.4kg
2 Years Warranty
SRNE 6KW Single Phase Hybrid Solar Inverter HYP4860S100-H
***2-Year Warranty***
Key Features
Advanced MPPT technology with up to 99.9% tracking efficiency
Supports parallel operation up to 6 units (up to 36kW total system power)
Time-slot charging and discharging function to reduce electricity costs during peak and off-peak periods
Off-grid operation with optional battery-free output mode
Modern industrial-grade design with a clean, professional appearance
Supports BMS communication for lithium battery systems
Model: HYP4860S100-H
Inverter Output
Rated Output Power: 6,200 W
Maximum Output Power: 12,400 VA
Rated Output Voltage: 230 Vac (L / N / PE, Single Phase)
Motor Load Capacity: Up to 5 HP
Rated AC Frequency: 50 / 60 Hz
Waveform: Pure Sine Wave
Transfer Time: 10 ms (typical)
Battery Specifications
Supported Battery Types: Lithium-ion, Lead-acid, User-defined
Rated Battery Voltage: 48 V
Battery Voltage Range: 40 – 60 Vdc
Max. Solar Charging Current: 100 A
Max. Grid / Generator Charging Current: 80 A
Max. Hybrid Charging Current: 100 A
Solar Input
MPPT Trackers: 2
Max. PV Array Power: 4,500 W + 4,500 W
Max. Input Current: 18 A + 18 A
Max. Open Circuit Voltage: 550 Vdc + 550 Vdc
MPPT Voltage Range: 120 – 480 Vdc
Grid / Generator Input
Input Voltage Range: 90 – 280 Vac
Input Frequency Range: 50 / 60 Hz
Bypass Overload Current: 40 A
Efficiency
MPPT Tracking Efficiency: Up to 99.9%
Maximum System Efficiency: 92%
General Information
Parallel Capability: 1–6 units
(More than 3 units in parallel can form a three-phase output system)
Dimensions (W × H × D): 510 × 350 × 133 mm
Net Weight: 13 kg
SRNE 6KW Single Phase Hybrid Solar Inverter HYP4860S100-H
***2-Year Warranty***
Key Features
Advanced MPPT technology with up to 99.9% tracking efficiency
Supports parallel operation up to 6 units (up to 36kW total system power)
Time-slot charging and discharging function to reduce electricity costs during peak and off-peak periods
Off-grid operation with optional battery-free output mode
Modern industrial-grade design with a clean, professional appearance
Supports BMS communication for lithium battery systems
Model: HYP4860S100-H
Inverter Output
Rated Output Power: 6,200 W
Maximum Output Power: 12,400 VA
Rated Output Voltage: 230 Vac (L / N / PE, Single Phase)
Motor Load Capacity: Up to 5 HP
Rated AC Frequency: 50 / 60 Hz
Waveform: Pure Sine Wave
Transfer Time: 10 ms (typical)
Battery Specifications
Supported Battery Types: Lithium-ion, Lead-acid, User-defined
Rated Battery Voltage: 48 V
Battery Voltage Range: 40 – 60 Vdc
Max. Solar Charging Current: 100 A
Max. Grid / Generator Charging Current: 80 A
Max. Hybrid Charging Current: 100 A
Solar Input
MPPT Trackers: 2
Max. PV Array Power: 4,500 W + 4,500 W
Max. Input Current: 18 A + 18 A
Max. Open Circuit Voltage: 550 Vdc + 550 Vdc
MPPT Voltage Range: 120 – 480 Vdc
Grid / Generator Input
Input Voltage Range: 90 – 280 Vac
Input Frequency Range: 50 / 60 Hz
Bypass Overload Current: 40 A
Efficiency
MPPT Tracking Efficiency: Up to 99.9%
Maximum System Efficiency: 92%
General Information
Parallel Capability: 1–6 units
(More than 3 units in parallel can form a three-phase output system)
Dimensions (W × H × D): 510 × 350 × 133 mm
Net Weight: 13 kg
Deye 3.6kW Single Phase Hybrid All-in-One Energy Storage Inverter IP65This Deye inverter features 2x rated power output for 10 seconds, quick and simple setup, one-click diagnostics via Deye Cloud, smart EMS with real-time monitoring, and IP65 protection for reliable long-term outdoor operation.Features
All-in-One: Hybrid inverter and LFP battery in one sleek system.
Smarter Energy Use: Peak-shaving, smart load, AC coupling, time of use.
Scalable Capacity: Modular design expandable from 5 kWh to 50 kWh.
Uninterrupted Supply: 4 ms seamless switchover from grid to back-up for energy security.
Effortless Installation: Tool-free stacking for quick and easy installation.
Smart Control: Convenient management via App, PC, or touch display.
Ideal ApplicationsSuitable for residential solar + storage systems in villas and single-family homes.For off-grid or weak-grid power supply in remote rural areas and islands.Enables retrofit and upgrade of old PV systems.Specifications
Operating Temperature Range: -40 to +60℃, >45℃ Derating
Permissible Ambient Humidity: 0-100%
Permissible Altitude: 2000m
Noise: <30 dB(A)
Ingress Protection(IP) Rating: IP65
Protection Level: Class I
Type of Cooling: Intelligent Air Cooling
Warranty: 10 years
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**4th Generation AU Version Inverter**
**10-Year Warranty**
SUN-3K-SG04LP1-24-AU |24V | 3kW | Single Phase | MPPT | Hybrid Inverter | LV Battery Supported
Higher yields / Safe & Reliable / Smart / User-friendly
Colorful touch LCD, IP65 protection degree
AC couple to retrofifit existing solar system
Max. 16 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel
Max. charging/discharging current of 140A
6 time periods for battery charging/discharging
Support storing energy from diesel generator
Model: SUN-3K-SG04LP1-24-AU
Battery Input Data
Battery Type: Lead-acid or Lithium-ion
Battery Voltage Range (V): 20V-30V
Max. Charging Current (A): 140
Max. Discharging Current (A): 140
Charging Strategy for Li-Ion Battery: Self-adaption to BMS
Number of Battery Input: 1
PV String Input Data
Max. DC Input Power (W): 4500
Rated PV Input Voltage (V): 500
Start-up Voltage (V): 125
MPPT Voltage Range (V): 150-425
Rated DC Input Voltage(V): 370
Max. Operating PV Input Current (A): 13
Max. Input Short-Circuit Current (A): 17
No. of MPP Trackers/No. of Strings MPP Tracker: 1/1
AC Output Data
Rated AC Output Active Power (W): 3000
Max AC Output Active Power (W): 3000
AC Output Rated Current (A): 13
Max. AC Output Current (A): 13
Max. Continuous AC Passthrough (A): 35
Peak Power (off grid): 2 time of rated power, 10 S
Efficiency
Max. Efficiency: 97.60%
Euro Efficiency: 96.50%
MPPT Efficiency: 99.90%
General Data
Weight (kg): 17
Cabinet size (mm): 330W x 433H x229D(Excluding connectors and brackets)
Protection Degree: IP65
Install info professional service support! Communication with battery service support!
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**4th Generation AU Version Inverter**
**10-Year Warranty**
SUN-3K-SG04LP1-AU | 3kW | Single Phase | MPPT | Hybrid Inverter | LV Battery Supported
Higher yields / Safe & Reliable / Smart / User-friendly
Colorful touch LCD, IP65 protection degree
AC couple to retrofifit existing solar system
Max. 16 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel
Max. charging/discharging current of 70A
6 time periods for battery charging/discharging
Support storing energy from diesel generator
Model: SUN-3K-SG04LP1-AU
Battery Input Data
Battery Type: Lead-acid or Lithium-ion
Battery Voltage Range (V): 40-60
Max. Charging Current (A): 70
Max. Discharging Current (A): 70
Charging Strategy for Li-Ion Battery: Self-adaption to BMS
Number of Battery Input: 1
PV String Input Data
Max. DC Input Power (W): 4500
Rated PV Input Voltage (V): 500
Start-up Voltage (V): 125
MPPT Voltage Range (V): 150-425
Rated DC Input Voltage(V): 370
Max. Operating PV Input Current (A): 13
Max. Input Short-Circuit Current (A): 17
No. of MPP Trackers/No. of Strings MPP Tracker: 1/1
AC Output Data
Rated AC Output Active Power (W): 3000
Max AC Output Active Power (W): 3000
AC Output Rated Current (A): 13
Max. AC Output Current (A): 13
Max. Continuous AC Passthrough (A): 35
Peak Power (off grid): 2 time of rated power, 10 S
Efficiency
Max. Efficiency: 97.60%
Euro Efficiency: 96.50%
MPPT Efficiency: 99.90%
General Data
Weight (kg): 17
Cabinet size (mm): 330W x 433H x229D(Excluding connectors and brackets)
Protection Degree: IP65
Install info professional service support! Communication with battery service support!
**Vector Approved Inverter**
**10-Year Warranty**
ASW10000-S-A | 10kW | Single Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick and easy to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Built to international quality standards, featuring an integrated DC switch and an IP66-rated design for reliable outdoor performance.
User-friendly
Supports 16 A input current—ideal for bifacial and large-area PV modules—with 3 MPPTs for flexible array design and ShadeSol technology for enhanced performance in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 15000 Wp STC
Max. input voltage: 600V
MPP voltage range / rated input voltage: 80 V - 560 V / 360 V
Min. input voltage: 80 V
Initial. feed in voltage: 100 V
Max. operating input current: 16A
Max. short circuit current: 22.5A
No. of independent MPPT inputs / strings per MPPT input: 3/1
Output (AC)
Rated active power: 10000W
Rated apparent power: 10000VA
Max. apparent power: 10000VA
AC nominal voltage: 220V/230V/240V
AC voltage range: 180V to 295V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 50A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 1
Harmonic distortion (THD) at rated output: < 3%
General data
Dimensions (W / H / D): 503 / 435 / 183 mm
Weight:
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**10 Years Warranty**
SUN-10K-G02P1-AU-AM2 | 10kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.7%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-10K-G02P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 15
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 26+26
Max. Input Short Circuit Current (A): 39+39
No. of MPP Trackers/ No. of Strings MPP Tracker: 2/2+2
AC Output Side
Rated AC Output Active Power (kW): 9.99
Max. AC Output Apparent Power (kVA): 9.99
Rated AC Output Current (A): 43.5
Max. AC Output Current (A): 43.5
Rated Output Voltage/Range (V): 230
Efficiency
Max. Efficiency: 97.7%
Euro Efficiency: 97.2%
MPPT Efficiency: >99%
Equipment Protection
DC Polarity Reverse Connection Protection
AC Output Overcurrent Protection
AC Output Overvoltage Protection
AC Output Short Circuit Protection
Thermal Protection
DC Terminal Insulation Impedance Monitoring
DC Component Monitoring
Ground Fault Current Monitoring
Power Network Monitoring
Island Protection Monitoring
Earth Fault Detection
Overvoltage Load Drop Protection
Residual Current (RCD) Detection
Arc Fault Circuit Interrupter (AFCI): Optional
Interface
Communication Interface: RS485
Monitor Mode: GPRS/WIFI/Bluetooth/4G/LAN(optional)
General Data
Operating Temperature Range (°C): -25 to +60°C, >45°C Derating
Cabinet Size (WxHxD mm): 330x410x213.5 (Excluding Connectors and Brackets)
Weight (kg): 14.8
Warranty: 10 Years
Grid Regulation: AS/NZS 4777.2
Safety EMC/Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Features:
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
MODEL: PV18-3024 PRO
Nominal Battery System Voltage: 24VDC
INVERTER OUTPUT
Rated Power: 3000VA / 3000W
Surge Power: 6000W
Waveform: Pure sine wave
AC Voltage Regulation (Batt.Mode): 230VAC±5%(Setting)
Inverter Efficiency(Peak): 90%
Transfer Time: 10ms (UPS / VDE4105) / 20ms (APL)
AC INPUT
Voltage: 230VAC±5%
Selectable Voltage Range: 170~280VAC(UPS) / 90~280VAC(APL) / 184~253VAC(VED4105)
Frequency Range: 50Hz / 60Hz(Auto sensing)
BATTERY
Normal voltage: 24VDC
Floating Charge Voltage: 27.4VDC
Overcharge Protection: 30VDC
SOLAR CHARGER & AC CHARGER
Maximum PV Array Open Circuit Voltage: 450VDC
Charging Algorithm: 3-Step (Flooded Battery, AGM / GEL / LEAD Battery), 4-Step (Li)
Maximum PV Array Power: 4000W
PV Array MPPT Voltage Range: 150~430 VDC
Maximum Solar Charge Current: 80A/100A
Maximum AC Charge Current: 60A/80A
Maximum Charge Current: 80A/100A
MECHANICAL SPECIFICATIONS
Machine Dimensions: 322 x 486 x 134mm
Package Dimensions: 426 x 560 x 260.5mm
Net Weight: 8kg
Gross Weight: 9.5kg
2 Years Warranty
**Vector Approved Inverter**
**DEYE New Zealand Distributor - Micromall Solar**
**10 Years Warranty**
SUN-8K-G02P1-AU-AM2 | 8kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.7%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-8K-G02P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 12
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 18+26
Max. Input Short Circuit Current (A): 27+39
No. of MPP Trackers/ No. of Strings MPP Tracker: 2/1+2
AC Output Side
Rated AC Output Active Power (kW): 8
Max. AC Output Apparent Power (kVA): 8
Rated AC Output Current (A): 34.8
Max. AC Output Current (A): 34.8
Rated Output Voltage/Range (V): 230
Efficiency
Max. Efficiency: 97.7%
Euro Efficiency: 97.2%
MPPT Efficiency: >99%
Equipment Protection
DC Polarity Reverse Connection Protection
AC Output Overcurrent Protection
AC Output Overvoltage Protection
AC Output Short Circuit Protection
Thermal Protection
DC Terminal Insulation Impedance Monitoring
DC Component Monitoring
Ground Fault Current Monitoring
Power Network Monitoring
Island Protection Monitoring
Earth Fault Detection
Overvoltage Load Drop Protection
Residual Current (RCD) Detection
Arc Fault Circuit Interrupter (AFCI): Optional
Interface
Communication Interface: RS485
Monitor Mode: GPRS/WIFI/Bluetooth/4G/LAN(optional)
General Data
Operating Temperature Range (°C): -25 to +60°C, >45°C Derating
Cabinet Size (WxHxD mm): 330x310x208.5 (Excluding Connectors and Brackets)
Weight (kg): 12.1
Warranty: 10 Years
Grid Regulation: AS/NZS 4777.2
Safety EMC/Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
**Vector Approved Inverter**
**10-Year Warranty**
ASW8000-S-A | 8kW | Single Phase | 3 MPPT | string Inverter
Higher yields / Safe & Reliable / Smart / User-friendly
Easy-to-install
Quick and easy to install with basic tools, featuring a compact wall-mount design and fast setup and commissioning via Solplanet apps.
Reliable
Built to international quality standards, featuring an integrated DC switch and an IP66-rated design for reliable outdoor performance.
User-friendly
Supports 16 A input current—ideal for bifacial and large-area PV modules—with 3 MPPTs for flexible array design and ShadeSol technology for enhanced performance in shaded conditions.
Technical Datasheet
Input (DC)
Max. PV array power: 12000 Wp STC
Max. input voltage: 600V
MPP voltage range / rated input voltage: 80 V - 560 V / 360 V
Min. input voltage: 80 V
Initial. feed in voltage: 100 V
Max. operating input current: 16A
Max. short circuit current: 22.5A
No. of independent MPPT inputs / strings per MPPT input: 3/1
Output (AC)
Rated active power: 8000W
Rated apparent power: 8000VA
Max. apparent power: 8000VA
AC nominal voltage: 220V/230V/240V
AC voltage range: 180V to 295V
AC grid frequency / range: 50 Hz / 45 Hz to 55 Hz, 60 Hz / 55 Hz to 65 Hz
Max. output current: 40A
Adjustable power factor range: 0.8 leading to 0.8 lagging
Feed-in phases: 1
Harmonic distortion (THD) at rated output: < 3%
General data
Dimensions (W / H / D): 503 / 435 / 183 mm
Weight:
Introducing the Mustpower INVERTER PV30-3024PRO!
The Mustpower PV30-3024 PRO is an off-grid hybrid inverter designed for versatile usage. It features an 80A MPPT controller, a 3000W low-frequency inverter (with a peak power of 9000W), and is compatible with off-grid systems and generators.
Key Features:
Pure sine-wave output, suitable for various domestic appliances such as TVs, refrigerators, fans, air conditioners, induction cookers, and microwave ovens.
Superior performance thanks to CPU control technology.
Wide input voltage range with accurate output and AVR (Automatic Voltage Regulation) function.
Equipped with internal protection against overloads, short circuits, over-voltage, low-voltage, and over-heating.
Easy monitoring of inverter status with LED indication (upgradeable to LCD display).
Compatible with generators and allows for external battery connection.
Intelligent battery management system with protection against overcharging and over-discharging, among others.
Generator compatible.
Specifications:
Model Name: PV3000
Model Designation: PV30-3024PRO
Operating Temperature: 0°C to 40°C
Protection Degree: IP 20
Rated Power: 3000W
DC Input: 24VDC
AC Output: 230VAC 50/60Hz
AC Input: 230VAC 50/60Hz
Rated Current: 80A
System Voltage: 24VDC
MPPT Voltage Range: 30-130VDC
Maximum Solar Voltage (VOC): 145VDC
Maximum Charge Current: 80A
Dimensions (W*H*D): 423*247*197mm
Storage Temperature: -15°C to 60°C
Audible Noise: 60dB MAX
Display: LED+LCD
Standard Warranty: 1 year
This inverter fully complies with AS/NZS4777 and the new AS/NZS5033+ IEC 62109-1 & IEC 62109-2 + AS/NZS 5033:2014 Compliance, meeting the latest NZ 2015 specification requirements.
The HP-AHP20A series is a high-frequency inverter charger. It supports multiple charging options, including utility, diesel generator, and solar. It is designed for utility bypass, inverter output, and energy management. The advanced DSP chip, along with its control algorithm, ensures rapid response times, reliability, and high conversion efficiency. Customers can efficiently utilize energy by flexibly switching between solar and utility power using customized settings. This high-quality product provides a stable power supply and is suitable for hybrid power generation systems that combine solar, utility, and oil engine sources. It meets the application requirements for customers seeking cost-effective residential power supply solutions.
Features
Pure sine wave output
Supports battery or non-battery modes
PFC technology reduces the demand on the power grid capacity
Advanced MPPT technology, with max. tracking efficiency higher than 99.5%
Supports charging from multiple types of generators
Battery charging or discharging current limits are compatible with various types of batteries
Adjustable maximum utility charging current for flexible configuration of utility charging power
Large size LCD display for better status monitoring
RS485 communication interface with optional 4G, WiFi, or TCP modules for remote monitoring
Comprehensive electronic protections
AC output supports parallel operation, standard configuration of 12 units in parallel
AC output parallel operation supports single-phase and three-phase settings
Model: HP3522-AH1250P20A
Utility Voltage: 176VAC - 264VAC (Default) 90VAC - 280VAC (Configurable)
Utility Frequency: 45Hz - 65Hz
Maximum Utility Charging Current: 110A
Inverter output
Inverter Rated Power: 3500W
3-second Transient Surge Output Power: 7000W
Inverter Output Voltage: 220 / 230VAC +-3%
Inverter Frequency: 50/60Hz +-0.2%
Output Voltage Waveform: Pure sine wave
Dimension(mm): 654L × 291.4W × 163H
Net Weight: 15.3 kg
Introducing the New Uninterruptible Power Supply Low-Frequency Pure Sine Inverter!
As a specialized solar service company, we offer quality products and comprehensive support. Our expertise ensures professional, efficient system design solutions tailored to your needs.
Inverter Uses:
Suitable for PV systems.
Ideal for RV modifications.
Compatible with lithium batteries.
Product Features:
Continuous power output.
Universal socket design for all appliance connections.
Fully isolated input and output.
Transformer isolation for power.
Optocoupler isolation for signals.
Independent auxiliary power.
High efficiency over 93%.
Constant power output with real short circuit protection.
SMT chip technology for reliable, stable output.
PWM regulated power, output voltage ±3%.
Specifications:
Rated Power: 6000W
Peak Power: 22000W
Battery Voltage: 24V
Dimensions: 650×220×180 mm
Weight: 39kg
AC Input Voltage Range: 170-260VAC (220V), 85-130VAC (110V)
Input Frequency: 45-65Hz
Battery Voltage Range: 24V
Output Voltage Range: 230V/240V±3% (Inverter mode)
Output Frequency: 50/60±1%
Utility Output Frequency Range: 50 Hz/60 Hz auto-tracking
Output Waveform: Pure sine wave
Efficiency: >85%
Transfer Time: ≤5ms
Compatible Battery Types: Lead-acid, colloidal, lithium-iron, ternary lithium, unconventional batteries
Charging Voltage Range: 24VDC
Protections: Short circuit, high/low voltage, overcharge, overload, high temperature
Overload Protection: Stops at 110%-120% load after 60 seconds, at 150% load after 10 seconds.
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-6K-G05P1-AU-AM2 | 6kW | Single Phase | 2 MPPT
2 MPP trackers, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-6K-G05P1-AU-AM2
PV String Input Data
Max. PV Input Power (kW): 9
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 18+18
Max. Input Short Circuit Current (A): 27+27
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1+1
AC Output Data
Rated AC Output Active Power(kW): 6
Max. AC Output Apparent Power(kVA): 6
Rated AC Output current (A): 26.1
Max. AC Output Current(A): 26.1
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 305×280×180mm
Weight: 7.7kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
***Vector Approved Inverter***
***DEYE New Zealand Distributor - Micromall Solar***
**10 Years Warranty**
SUN-6K-G04-AU | 6kW | Single Phase | 2 MPPT
Higher yields / Safe & Reliable / Smart / User-friendly
1 MPP tracker, Max. efficiency up to 97.5%
Zero export application, VSG application
String intelligent monitoring (optional)
Wide output voltage range
Anti-PID function (Optional)
Low start-up voltage of 80V
Technical Specifications:
Model: SUN-6K-G04-AU
PV String Input Data
Max. PV Input Power (kW): 9
Max. PV Input Voltage (V): 550
Start-up Voltage (V): 80
MPPT Voltage Range (V): 70-500
Rated PV Input Voltage (V): 360
Max. Operating PV Input Current (A): 13+13
Max. Input Short Circuit Current (A): 19.5+19.5
No. of MPP Trackers/
No. of Strings MPP Tracker: 2/1
AC Output Data
Rated AC Output Active Power(kW): 6
Max. AC Output Apparent Power(kVA): 6
Rated AC Output current (A): 26.1
Max. AC Output Current(A): 26.1
Efficiency:
Max. Efficiency: 97.5%
Euro Efficiency: 97.0%
MPPT Efficiency: >99%
General Data:
Dimensions: 330×323×190mm
Weight: 8kg
This inverter is a blend of high efficiency, safety, and user-friendly features, making it a superb choice for residential solar power systems.
PV1900 EXP is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1900 EXP Series can run without battery. The Maximum PV array open circuit voltage can reach 500V and MPPT voltage is 90 - 430Vdc, which Can help customers make full use of solar energy.
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 500V (450V for parallel)
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Dual outputs for smart load management(optional)
Can communicate with lithium batteries
MODEL: PV19-4024 EXP
Nominal Battery System Voltage: 24VDC
INVERTER OUTPUT
Rated Power: 4000VA / 4000W
Surge Power: 8000W
Waveform: Pure sine wave
AC Voltage Regulation (Batt.Mode): 230VAC +-5%(Setting)
Inverter Efficiency(Peak): 92%
Transfer Time: 10ms (UPS / VDE4105) / 20ms (APL)
AC INPUT
Voltage: 230VAC
Selectable Voltage Range: 170 - 280VAC(UPS) / 90 - 280VAC(APL) / 184 - 253VAC(VED4105)
Frequency Range: 50Hz / 60Hz(Auto sensing)
BATTERY
Normal voltage: 24VDC
Floating Charge Voltage: 27.4VDC
Overcharge Protection: 30VDC
SOLAR CHARGER & AC CHARGER
Maximum PV Array Open Circuit Voltage: 500VDC (450V for parallel)
Charging Algorithm: 3-Step (Flooded Battery, AGM / GEL / LEAD Battery), 4-Step (Li)
Maximum PV Array Power: 5000W
Maximum Solar Charge Current: 100A
Maximum AC Charge Current: 80A
Maximum Charge Current: 100A
Dimensions (WxHxD): 322x486x134mm
2 Years Warranty
IPower-Plus is a high-frequency pure sine wave inverter that can convert 12/24/48VDC to 220/230V AC and power the AC loads. It is designed according to the international standard with higher quality, reliability, and safety. Ranging from 500W to 5000W, Ipower-Plus is compatible with lithium-ion batteries perfectly and suits any situation of DC to AC, such as RVs, boats, residentials, and places where require high-quality electrical power.
Product model: IP5000-42-Plus
Continuous Output Power: 5000W
Surge Power: 8000W@5S
Surge Current when Power On: < 65A
Output Voltage: 220VAC (±3%); 230VAC (-7% to +3%)
Output Frequency: 50/60Hz ±0.2%
Output Wave: Pure Sine Wave
Output Distortion THD: THD ≤ 3% (Resistive Load)
Load Power Factor: 0.2-1 (Load VA ≤ Continuous Output Power)
Rated Input Voltage: 48VDC
Input Voltage Range: 43.2~64.0VDC
Rated Output Efficiency: > 91.0%
Max. Output Efficiency: > 94.0% (30% Loads)
No-load Current: < 0.8A
USB Output: Not available
RS485 Communication Port: 5VDC / 200mA
Dimension (LxWxH): 516x231.5x123 mm
Mounting Dimension: 505x145mm
Net Weight: 9kg
Operating Temperature Range: -20°c to +60°c (Refer to the derating curve)
Relative Humidity: < 95% (Non-condensing)
Enclosure: IP20
